Jump to content

Harddrv1

Expired Membership
 View Profile  See their activity

  • Posts

    49

  • Joined

  • Last visited

 Content Type 

Everything posted by Harddrv1

  1. Harddrv1
    So 1 more stupid question but does anyone know if I can replace current clutch with something like this https://www.ebay.ca/itm/22mm-lever-Handle-Hydraulic-clutch-Brake-Pump-Master-Cylinder-Motorcycle/142684245982?var=441669940587&hash=item2138a4cfde:g:eWcAAOSwoBlaep7Z it says only up to 500cc but looks similar not sure though if it holds enough fluid and weather or not the banjo bolt is the same, thanks again Gould be the last stupid question for awhile.
  2. Harddrv1
    Oh ok ty
  3. Harddrv1
    Oh ok ty does this happen often? Is that a Necessary part?
  4. Harddrv1
    Oh ok ty at least I know what to reaserch now looking at other bobber builds I don’t see this box so thinking it can be removed?? Or does it serve a purpose?? Hmm anyway ty I’ll be reading tonight I guess
  5. Harddrv1
    Thought someone would answer this right away I truly do not know what this triangle plastic thing is does no one know or is it just that stupid a question lmao??
  6. Harddrv1
    Still updateing this as I have time but just wondering what this is and if it can be removed?? I see other bobber builds don’t have this part?
  7. Harddrv1
    Oh oh I am much further along it’s Good Friday and had a family commitment to go to will finish posturing when I get home, try anyway had a few beers may end up being tomorrow some time lol
  8. Harddrv1
    Yeah Hello all been awhile since I was here, winters are long and harsh here in Alberta so haven’t done much on my bike since last here. I hate to double post but my last thread was more about an idea to restore my bike via 3D printing here https://www.venturerider.org/forum/showthread.php?137341-3d-printing-replacement-fairing-and-parts&p=1045382#post1045382. Anyway that idea hasn’t panned out well and now I can’t even get my printer going so I decided to go another route. It’s been a slow process as I am still learning a lot but I hope to be up and running soon, I decided to come in here and share with you guys in stead of raging out after snapping my clutch level off in a poor attempt to straighten it sigh... here is a photo of the add I purchased this bike for $250 CAD it did come with the bags and I was planning to keep them however they were in fairly ruff shape. here I begin tear down some of these pics were on other thread but felt i should put them all together as you can see it was in pretty bad shape This is where I attempt to repair the fairing But they were just so bad and it was my first attempt at body work For got how to edit on this site lol been kinda of a relearning period so bear with me lol, any way this is that clutch lever I damaged trying to straighten sigh... This is the damaged sifter I have yet to repair This is How im securing my tail lights at the momemt this is temporary as budget permits I may swap out this entire rear end changing the rear fender etc some more photos showing some cable management etc Test fitting of the headlight test fitting of the new side Panels (I may replace these as well but this gets me on the road this summer Well Im all caught up now I think Till I get back out the the shop and finish assembly
  9. Harddrv1
    Did you extend the rake on this too apart from the leading link?
  10. Harddrv1
    Boo almost warm enough to bust out the bike and registry’s still refusing me still say invalid vin
  11. Harddrv1
    Not sure if this is helpful but I found this diagram for my build it converts a 2 wire led to run in a 3 wire system hope this helps. Do please note that I have not yet tried this just had gathered the information while waiting for my parts, also you note this is a 2 to 1 diagram for 3 to 2 the third wire connects to ground wire of led if that makes sense
  12. Harddrv1
    Just thought I’d check in in case anyone was following this, sorry to disappoint but these fairing were way damaged the more I’d sand the more I’d discover. They were basically duct tape and bondo so unfortunately I’m going to be going another route I still may do a replacement fender but for now I just pieced together the other one I had. I still believe this is a great idea just don’t want to spend anymore time and money trying to repair these and on eBay there about $100 a panel. I may make another thread in my current progress which is a more a naked type, not really naked in that I’m making my own low pro type siding. Anyway...
  13. Harddrv1
    Sorry about crap pictures it's actually 81H-000506 if you want it for your records, got it insured as an 82 though cause that's what bill of sale said ... sigh oh well it's done anyway, now just stupid registration they didn't like the chicken scratch bill of sale so I have to get seller to mail me 1!
  14. Harddrv1
    Ok ty very much negotiated at insurance right now
  15. Harddrv1
    Please help me can't get insurance or registration because my vin is to short also guy I bought it from listed it as an 82 that's also what he wrote on the bill of sale???
  16. Harddrv1
    verified nothing in there Hopefully i can repair and scan tomorrow or as stated maybe i can scan 1 side repair it digitally and then mirror it for both sides ill find out soon i guess, sorry for ****ty pics my shop is pretty dark and times been tight it was fix the lights or work on my bike
  17. Harddrv1
    Sigh really...
  18. Harddrv1
    yes as mentioned above once the ground work is laid it is open season on designing. I imagine as well that there will be many remixes from others too making many more options available. 2018 here soon we will be able to download our fairings and create them at home out of next to nothing kinda like Star Trek
  19. Harddrv1
    Yes this is one concern I have as well I have made some pretty strong prints that have held up a long time. If you checked my Thingiverse page I made that ironman helmet that thing is super strong so I'm hopeing for the best, just to add in I think I finally have a day off tomorrow so hopeing I'll get a bit of time to do the scan if it works out some clean up will probably be needed I'll post step by step as I go so if you want you can download them and help clean them up if you want. I have been super busy at work lately.
  20. Harddrv1
    Yeah i I seen it very cool think I'm going to leave my bags on though I still may reprint front end not totally decided yet if I can get a good scan replacements can be made anyway I want once I have a template I can reform them into anything and have them bolt on something like have the headlight in a dragons mouth for example of course this will be far down the line after a Templates made and I now it will hold up etc
  21. Harddrv1
    Got the right side fairing off it sucked the previous owner tryed to "fix" it and it was all glued together with the front and top parts but I got it this was the least damaged of the panels so I'm hoping I can scan it then mirror it for the other side. However looking At the bike now I may even revise my plan and just eliminate the fairing all together I'm missing the side pieces and the front is so damaged. I didn't think of this before as reading other posts on here I expected it to be packed full of crap in there electronics etc but either this model doesn't have it or someone has already tore it all out all I can see in there was a coolant overfill and a 12v lighting box that should be easy to move. So now thinking I may just replace headlight signal lights mirrors gadges and overFill with nicer newer ones led etc Have a "naked" front end. Any thoughts? I think it will be cheaper and give it a nicer modern look?
  22. Harddrv1
    I can't seem to click link opens an email?? Anyway you can see my work here I'm still learning but getting pretty good I guess https://www.thingiverse.com/harddrv1/about I could print and send you one but would need to charge for material I'm broke ATM depends on the size it shouldn't be much though. Ok typing it direct works yeah that wouldn't be difficult looks like a small arduino or similar plus a small display should be simple, I may not even half to full design it for example this may work https://www.thingiverse.com/thing:845415 would just need it a bit bigger to acomadate your expansion board and add holes for the hoses? You have comming out of it
  23. Harddrv1
    Well damn lol well if anyone has an m1 and wants to test my idea I found these.https://grabcad.com/library/yamaha-m1-fairing-2 most high schools public library's and print shops should be able to print theses.
  24. Harddrv1
    Hello everyone I'm new here sort of introduced myself here and posted pics of my "new" bike http://www.venturerider.org/forum/showthread.php?137259-Welcome-to-the-forum-Harddrv1-from-Fort-kent-AB. Anyway I built a 3d printer a few years ago and to keep costs low was wondering if anyone has any 3d models of fairing for the 84 venture if so I would be grateful if you could share them or email them to me, Im not a great modeler but I may attempt to patch mine up the best I can and scan them to make them printable if I can. Or redesign them if I can but I'm hopping one of you has done this already so I can just use your thanks in advance
×
×
  • Create New...