Jump to content

Sterling Turner

Expired Membership
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by Sterling Turner

  1. Sterling Turner
    Thanks Everyone !!!!! For your replies. As to the last post, I am using something other than Yamaha filter, I'm using to Purolator Pure One filter.... Suppose to be real good ????
  2. Sterling Turner
    Well Folks, I just got back from the Yamaha dealer (had new Avons put on), and when I started it to leave, it had that ticking for about 10 seconds... One of the guys from the service shop was standing beside it, so I asked what could be causing it (telling him that I just changed to this synthetic oil and it hadn't made this noise before that)... He said it was because I went to a thicker oil (20w-50) and that he felt it was my hydraulic lifters taking longer to pump up and adjust .... Maybe so, I don't know... He said not to worry unless it got worse or ticked longer ?????
  3. Sterling Turner
    Thought I would run this by some of you... I just did an oil change and decided to switch to Amsoil 20W-50 and new filter. Started it and Drove it about 3 miles, shut it off and it set for a little while, when I restarted it, the engine started tapping (like valve noise). No engine oil light came on, but noise went away after about 30 seconds... Oil level was at the top of the fill mark (with engine off). Never did this with Dino oil, just wondered what caused it to start the loud ticking noise.... Sounded like it was coming more from the front of the engine. It did do it again, but not as loud and not as long.... anyone ever experienced this happening to them ?
  4. Sterling Turner
    "Carbon One" has a posting on here somewhere, that addresses crash bar supports. I highly recommend that you make a set for your bike if you are going to install highway pegs... It takes the forward flex out of the bars when you are using the pegs. Easy to make and works great !!!!! Sorry that I'm not smart enough to post a link so you can go right to it.
  5. Sterling Turner
    Dennis: Thanks for the invite, but already have made plans with the family... Hope everyone has a great time/ride. Sterling
  6. Sterling Turner
    Got it all taken care of. ...Thanks for the help and replies, He's happy and headed for the Dragon !!! Thanks again ... This site and the people are the best !!! Sterling
  7. Sterling Turner
    Ok, Thanks guys, I'll cross my fingers and give it a shot... I did receive a call from him and he said his bike is a 1996 model, if that helps at all.
  8. Sterling Turner
    Had a friend call, He just purchased an older model "Royal Star", I didn't get the year of the bike. I don't know the different models of Yamaha, but he said it wasn't a Venture, it was a Royal Star... Anyway, He wanted to know if I could sync his carbs like I did on my 07' Venture. I said I would if I could figure out where to hook up the Carbtune and which screws to turn ??? That's my question !!! Is there a thread here that describes how to sync his carbs ? He said his engine was very similar to mine (he seen my bike). But is there a difference ??? Sorry that I don't know the year of his bike, I couldn't reach him to ask, but he's coming over this afternoon... Hopefully I can help him if someone can direct me. Thanks Sterling
  9. Sterling Turner
    My two cents worth, I've been a competitive shooter since my late teens, now in my late fortys... First, Learn to use the gun you choose !!!! You have received lots of good information, My suggestion is that if you choose a pistol, go with a minimum of .380 caliber, A State Policeman told that to my buddy, after my buddy had pumped 3 shots from a .25 Auto into a Muggers gut and the fellow got away (later to be arrested at the hospital) . My preference is .40 S&W caliber for self/home defense (but that's me). Yes, a shotgun is awesome, but you need to be able to manuver it.... My piece sleeps with me "cocked and locked". Also think about "night sights" or a tactical light, they will come in handy.
  10. Sterling Turner
    Just got back from the Dragon and Blue Ridge, just to add a note, there is a small section of the Blue Ridge Parkway that is closed right now. I can't remember exactly where it is, but you might want to check on it before you leave... Some others on this site may be able to tell you where you will encounter it. Have fun on your trip !!!
  11. Sterling Turner
    Just came back from a four State mini-tour. Took in Black Mtn. Ky, Pigeon Forge area, Deals Gap, Blue Ridge Parkway and places I will probably never find again. My reason for this thread is that by the forth day of riding, My butt was killing me (did ok first 3 days)...If it hadn't been for Advil, I probably would have stayed in a motel for a day to recover !!! I had a sheepskin over my seat, but am looking for more padding, if that will help. Tried an Air-Hawk once and it set me up higher and felt wobbly (didn't care for it).. Anyone ever used a Butt-Buffer or Gel pad with any satisfaction ??? Or any other advice on being able to log more miles before the sore butt syndrome kicks in. Heck, I'm still sore and have been home for two days !!!
  12. Sterling Turner
    I was riding the Gap on the same day as Everett (Tuesday), A Harley and Sport bike clipped each other in a curve while I was there ... A fun, but dangerous place if you don't keep on your toes !! Had to keep the radio turned up to drown out the loud whine of those Bridgestones while taking the curves (trying to wear them out !!) HA HA ... Sterling T.
  13. Sterling Turner
    Hey Steve: Nice to talk with you the other day, I am looking forward to receiving the grill... But more than that, looking forward to you getting over your surgery, back on your feet and kicking high.... Will keep you in our prayers !!! Good luck Pal.. Sterling
  14. Sterling Turner
    If you see the animals gathering in pairs, You might want to leave a little sooner
  15. Sterling Turner
    Yep.. I think they work real well, All of us around here, got ours from Alaska Leather. You don't sweat yourself to death on them and they are comfortable. http://www.alaskaleather.com/ Check them out !!!
  16. Sterling Turner
    My 07 RSV calls for a minimum of 91 octane, that's premium grade only. Plus I figure it's only about $1 more per tankfull to use the high grade stuff... Never tried regular in it yet.
  17. Sterling Turner
    I second what Dr Bar said, I get a deftening white noise/static from the CB when I ride by "some" transformers on utility poles ... Doesn't last long, but very loud.
  18. Sterling Turner
    I only have 5000 miles on my 07 RSV, I have read so many threads about the Bridgestone tires, none being good !!! I have these tires on my bike right now and they seem to be doing fine, but I have nothing to compare them to. My question is... What to expect from new/different brand tires ??? Is the dissatisfaction with Bridgestone, the mileage ? Poor handling ? What ??? And will I notice a big change in the handling of the bike ??? I think it rides and handles good now.... If it get any better, then WOW !!!!!
  19. Sterling Turner
    Thanks so much, to everyone who posted a reply. Looks like just about everyone that has satellite radio (xm or sirius), loves it.... I like music and I love to ride, so it looks like I need to empty the piggy bank again and add another goodie to the bike !!! We Kentucky "Hillbillys" do like other music besides Bluegrass, but Bluegrass ranks pretty high with me... Thanks again to everyone !!! Sterling T.
  20. Sterling Turner
    Go directly to the source for the right answers !!! I need some imput from fellow motorcycle riders. I have a zumo 550 on my RSV (love the GPS), I can buy an antenna/receiver (GMX-30) to get satellite radio music/sports, Accessing and controlling it through the GPS unit. However this thing cost over $200... Anyone using one ? And is it worth it ? I don't mind spending the money for the unit if it is a good product and works well. (FYI...I've never had, or heard satellite radios) This would keep me from mounting a seperate xm radio + antenna... Anyone using one of these ? and how do you like it ???? Thanks Sterling T.
  21. Sterling Turner
    Sad News from Rabbit Hash. Just got back from a ride to Rabbit Hash. While I was there, The fellow that was running the store told me the Mayor just passed away... He didn't say how the Mayor died, who knows, maybe from chasing cars !!! I wonder if there will be a re-election ???? I seen a small dog and a big old cat hanging out in front of that store, I wonder if they are getting ready to do a little politicking ???? This place did have a dog for a Mayor !!!
  22. Sterling Turner
    Hey Leonard: I'll update you as soon as I hear something from Rivco. Thanks for letting me know that I'm not the only one with this problem, I may relay that to Rivco... If anyone else has this problem, please post it for me. And to Eck: Thanks for the advice, wish I had read it before I had shipped the stand off. Thanks Guys Sterling
  23. Sterling Turner
    Anyone ever had a problem with their RSV leaning off center while on a Rivco Center Stand ? I checked the garage floor and it is level. My bike leans to the right wheather it is pulled in or backed in, so it's not the floor. I called Rivco and they are having me send it in to have it checked out... Everything looks straight under the bike, but my eyes aren't as good as they used to be. PS... This is an awesome site. I purchased an 07 blue/black RSV last Summer, and using the post on this site, I have set up, worked on and accessorized my bike to be one fine ride... Thanks to all !!!! Sterling Turner Frankfort, KY
×
×
  • Create New...