Jump to content

RDawson

Supporting Member
  • Posts

    2,535
  • Joined

  • Last visited

  • Days Won

    107

Everything posted by RDawson

  1. I’ve never dealt with converters so it may be a dumb question, How does the converter price compare to changing the motor to a single phase?
  2. The good news is once you get em dialed in they are great bikes. Sounds like you’re well on your way to reviving a gem.
  3. Check the part numbers on Partzilla diagrams.
  4. A trick I use to find air leaks is to spray Walmart carb cleaner around the carbs. If there’s a leak you’ll hear it rev up. Some of the name brands don’t work as well as the cheap stuff for that. Are all 4 synch nipples capped? Just trying to run thru all the possibilities in my head and my head is a scary place to go.
  5. Idle adjustment on a 2nd gen is a thumb wheel under and up against the tank on the right side. Make sure all 4 carbs are seated well into the intake boots and not sucking air, they can be very stubborn to get seated sometimes. Could the throttle cables be tight somewhere and not letting the carbs return to idle?
  6. Look at the needle and seat along with the float itself.
  7. I’m trying to decide between the bike or boat today.
  8. I was too busy raising kids and working two jobs to ride back then. Wish I hadn’t missed those years of VR.
  9. RDawson

    Vogel 2025

    This is a family friendly site!!! 4 letter words such as SNOW and WORK don’t belong here. 🤪
  10. I’m far from knowledgeable on the subject but have read older stator/rectifier designs won’t correctly charge LI batteries. They require an updated charging system, I don’t know where the RSV fits in that timeline. I’m gonna have to replace mine in the near future, I’ll stick with AGM as I’ve gotten 3-5 years out of each one I’ve used.
  11. You might check with @M61A1MECH. He builds quality plug and play light harnesses but I’m not sure about horn sets. The main goal is to run a fused hot wire from the battery through a relay to power the horn. I built my own and used the factory wires to fire the relay.
  12. RDawson

    Drones.

    I didn’t design it, I just took the picture. 😁😁😁 we were fishing when my wife told me to look back at the bridge. I figure some UFO nut might fall for it.
  13. RDawson

    Drones.

    Ha. I took that picture on a foggy morning from about 9 miles south. We were fishing when my wife noticed it looking like a UFO.
  14. RDawson

    Drones.

    @Steve S you may recognize that for what it is.
  15. RDawson

    Drones.

    I took this pic on KY Lake about a year and a half ago.
  16. An hour west of Steve and we have 5”. Almost a blizzard for this part of the country.
  17. Merry Christmas.
  18. Still gotta take the Harley jabs when I can get em. Nice bike.
  19. That usually comes from too much oil in the crankcase.
  20. Did you use loctite to bolt in on? 😛
  21. And some are 10s when you take em home but 2s the next morning. 🤪🤪🤪
  22. My sound effects are different though. I sound more like Rice Krispies when I’m moving.
  23. I made the mistake of hosting the wife’s family dinner, a very small group. I seem to only be able to cook like it’s my family (35-40 people). There’s enough left over for a Venture rally supper. Now we get to go Saturday for the big one, at least we can leave the leftovers at my brother’s house.
  24. Glad it’s not any worse. I watched Col Steve Austin as a kid, now I think a lot of us are becoming the new $6 million men. I’ve got the screws and anchors in my shoulder and a hardware store in my back according to the X-ray tech a couple weeks ago. This getting old stuff ain’t for sissies 😫
×
×
  • Create New...