Jump to content

KiteSquid

Expired Membership
 View Profile  See their activity

  • Posts

    2,509

  • Joined

  • Last visited

 Content Type 

Everything posted by KiteSquid

  1. KiteSquid
    The factory service manual is available for FREE in PDF format. on the left side of his page click on the VRTech link and you'll find it...
  2. KiteSquid
    You might have induced a ground loop when you added the tach. you might try moving the ground lead from the tach to the same place the radio grounds at.
  3. KiteSquid
    Another way you can handle the Carb heaters is to add a relay so when the heaters are on, one or more of your add on loads would be disabled. I would probably put it on a comparable load. I would add an indicator lamp to tell you when the carb heaters is on, so you don't think something is wrong with that load. Just a thought. Another idea is to make the loads switchable, so you could pick which load gets turned off... rotate them if the weather is very cold. Also, I would probably go with heated glove liners vice heated grips. Probally a lower load and it would get the heat on your hands, not in the air. What do snowmobile riders do? Someplace where they ride for work and for a long season, like Alaska or northern Canada. The easyest way to heat the rider is to move south.. Florida comes to mind.
  4. KiteSquid
    Great idea, more information in this tread: http://www.venturerider.org/forum/showthread.php?t=29150
  5. KiteSquid
    Great idea, more information in this tread: http://www.venturerider.org/forum/newreply.php?do=newreply&noquote=1&p=268842
  6. KiteSquid
    Get a locksmith to re-key one of the locks to match the other...
  7. KiteSquid
    I received mine about three weeks ago.... maybe mine was the last one to ship. If you can get one, without the Mercury, you might be able to order some Mercury thur a local pharmacy.
  8. KiteSquid
    To request to be put on this list, please post to this thread and you will be put on in order posted. no need to PM me as you will only be put on the list if you post to this thread... This thread is staying busy!!!! I hope I did not miss anybody!!!! If I did miss you, please remind me to put you in the proper place in line and I apologize if I missed anybody. Also, if you want on the list, please post to the thread instead of PMing me. People who originally, freely gave away their copy of RLAP IV or V KiteSquid Friesman1 jburrell People who currently have a copy AND who they need to send it to: calperin send to Yammer Dan (as 2RDLX did not reply with an address to calperin) KingSizer send to jvbailey3 Canada copy: Stanman send to gunkylump Canada birin Oldseadog saddlebum silvercrew Marcarl Lepapehermann Might I suggest that this copy go to Australia once it has made the circuit in Canada... Australia spear United States Foxman Cjacobs jkt69 Bob Myers Juggler Feets Jburrell (Would like to see RLAP IV as he has viewed RLAP V) Spankym r12guy Pilot BOO skydoc_17 Pilot Scooter uthpda camotor1 painterman67 Smith Iowawegian Bubber Roadhand Naked Rider (channged forum name from 1_2_ride_RSV) krome rose BurgyMon timgray wtho VegasVic Cerviperus nomadicbear spankym mastermechanic CMIK MikeC Kbay jhw47 PLEASE Remember to please post something you learned from the video. I have a question for those of you who have viewed it: Did you go buy your own copy of RLAP V? Don't forget to ask for your VentureRider forum discount. And again, I am not connected with RLAP, I just want my fellow bikers to have a long and healthy life on two wheels and anyway that we all can learn to ride safely is a good thing!!!!!!
  9. KiteSquid
    How do those Oreo Cows taste? Do they have a choloateity crunch to them????? http://www.antietamfarm.com/images/belted_galloway_pic1.jpg
  10. KiteSquid
    The Mercury Manometers are the most accurate and don't go out of calibration like any mechanical tool will. I have the SaberCycle sticks too!!!!!!!!!!!!!!!! probally the best $55 I have spent in a long time!!!!!!
  11. KiteSquid
    OR, look in the left column on any page here at the forum. There is a block titled Main Menu Click on the link titled VRTech and you will find your manuals!!!!
  12. KiteSquid
    The Virgina plate looks like a "Parrot Head" with his ham radio call sign. on the Internet I found the call sign K5WEO is assigned to a "BROWN, DAVID P of 3440 LAS VEGAS BLVD N 225 LAS VEGAS NV 89115 " by the FCC......so if you communicate with him again, ask him what bike David is riding now and how long he has been a Jimmy Buffet fan....just to mess with his mind..... OH and the photos are hosted at http://jennysgiftsetc.com/ for more mind game fodder..... it is in a folder called DPB, which is the initals of the brother listed above.... Also note they are removing the Ham radio and antenna, so there will be some modified wiring and holes where the screws and cables are removed from..... http://www.dmv.state.va.us/images/plates/parrot.jpg
  13. KiteSquid
    Caveat emptor
  14. KiteSquid
    I think it actually helps in racing applicatins. I use a very expenive, and hard to obtain, high tech gas mix in all my tires. Nitrogen 780,840 ppmv Oxygen 209,460 ppmv Argon 9,340 ppmv Water vapor ~4,000 ppmv Carbon dioxide 383 ppmv Neon 18.18 ppmv Helium 5.24 ppmv Methane 1.745 ppmv Krypton 1.14 ppmv Hydrogen 0.55 ppmv nitrous oxide 0.3 ppmv xenon 0.09 ppmv ozone 0.0 to 0.07 ppmv nitrogen dioxide 0.02 ppmv iodine 0.01 ppmv Oh, and trace amounts of carbon monoxide and ammonia
  15. KiteSquid
    Thanks for the comments!!!!!!! It is amazing to watch them ride, but with some practice, you can do it too!!!!!!
  16. KiteSquid
    I would probably use Deep Creep, which is basically Seafoam in a spray can.
  17. KiteSquid
    Oh, but here is another: 5000K is OUTSTANDING!!!!!
  18. KiteSquid
    This list is getting LONG, so if you are on the list, or want to be on the list, PLEASE read the list to see if you live near someone else on the list.... View it together. This might speed up the process.
  19. KiteSquid
    To request to be put on this list, please post to this thread and you will be put on in order posted. no need to PM me as you will only be put on the list if you post to this thread... This thread is staying busy!!!! I hope I did not miss anybody!!!! If I did miss you, please remind me to put you in the proper place in line and I apologize if I missed anybody. Also, if you want on the list, please post to the thread instead of PMing me. People who originally, freely gave away their copy of RLAP IV or V KiteSquid Friesman1 jburrell People who currently have a copy AND who they need to send it to: calperin send to Yammer Dan (as 2RDLX did not reply with an address to calperin) KingSizer send to jvbailey3 Canada copy: sarges46 send to Stanman Canada gunkylump birin Oldseadog saddlebum silvercrew Marcarl Might I suggest that this copy go to Australia once it has made the circuit in Canada... Australia spear United States Foxman Cjacobs jkt69 Bob Myers Juggler Kenw Feets Jburrell (Would like to see RLAP IV as he has viewed RLAP V) Spankym r12guy Pilot BOO skydoc_17 Pilot Scooter uthpda camotor1 painterman67 Smith Iowawegian Bubber Roadhand 1_2_ride_RSV krome rose BurgyMon timgray wtho VegasVic Cerviperus nomadicbear spankym mastermechanic CMIK MikeC Kbay jhw47 PLEASE Remember to please post something you learned from the video. I have a question for those of you who have viewed it: Did you go buy your own copy of RLAP V? Don't forget to ask for your VentureRider forum discount. And again, I am not connected with RLAP, I just want my fellow bikers to have a long and healthy life on two wheels and anyway that we all can learn to ride safely is a good thing!!!!!!
  20. KiteSquid
    a full tank of stabilized gas is your best bet. With an empty tank, you will get rust. Our gas tanks are bare steel on the inside.
  21. KiteSquid
    When you go to EFI you can also go to variable valve timing, and there is the key to building an engine that is both powerful and fuel efficient. IF the next generation of Venture has EFI and variable valve timing, I might buy one and sell my current ride/rides for it. All that electronics come at a price, and I for one would be willing to pay it. Just look at the motor in the 2nd gen VMax for the starting point.
  22. KiteSquid
    I would accecpt a car, but it would have to be a Ford Festiva Shogun. http://www.jaylenosgarage.com/images/photos/89Shogun_01.jpg Click-able image to Jay Leno's Garage page on his Ford Fiesta SHOgun.
  23. KiteSquid
    CONGRATULATIONS!!!!!!!!!! I am speechless!!!!!!
  24. KiteSquid
    Does the light bulb come on when you turn on the bike before starting?
  25. KiteSquid
    Probably no rescues, just picking up the parts.... BTW in the video, did you notice the guy that the videographer passes? The one that was clipping in properly? he clipped in past the bolt, then unclipped the other clip. GOOD JOB!!!!!
×
×
  • Create New...