Charlie Bravo

Thanks guys. Here's the update ; flashers working. loose contact at relay all cylinders firing. yellow wire to tci broke loose. reconnected now the cmu keeps flashing when i ground the light blue wire. neutral light on but cmu goes blank when side stand switch goes up. tested the switch and good all around. removed the gear selector cleaned the contacts and grounded each contact. no gear indicator on cmu. but the cmu no longer is dim when i hit each contact, except for the neutral lead.

Here's the latest. the short seems to be somewhere in the safety circuit including side stand switch, brake switches (bank and front), gear selector. something here is shorting. no gear indicator markers just N. when in neutral cmu dims and blinks. when you shift to 1st the lcd goes solid and bright. sidestand switch icon works, so does oil(drained it). going back to neutral blanks and dims. cmu cycles and battery warning blinks. ??????? GRRRRR... So close. checked cmu and circuit board connectors all look solid. Holy Gremlin chase Batman!!!!

Thanks guys. Here's the update ; flashers working. loose contact at relay all cylinders firing. yellow wire to tci broke loose. reconnected now the cmu keeps flashing when i ground the light blue wire. neutral light on but cmu goes blank when side stand switch goes up. tested the switch and good all around. removed the gear selector cleaned the contacts and grounded each contact. no gear indicator on cmu. but the cmu no longer is dim when i hit each contact, except for the neutral lead. Also the fuse box has been upgraded to blade type

Thanks guys. Here's the update ; flashers working. loose contact at relay all cylinders firing. yellow wire to tci broke loose. reconnected now the cmu keeps flashing when i ground the light blue wire. neutral light on but cmu goes blank when side stand switch goes up. tested the switch and good all around. removed the gear selector cleaned the contacts and grounded each contact. no gear indicator on cmu. but the cmu no longer is dim when i hit each contact, except for the neutral lead.

85 venture royale.. Sorry

Hello everyone, I'm having some frustrating electrical issues: 1. Bike runs on three cyliders. #3 no spark at all. coil ohms checked out power to red and white wire. Cant get a ohm reading on the yellow wire in larger tci plug. the others check out. ive tried three different tci. same issue 2. Battery lighjt flashing on cmu very dim. cmu goes blank when side stand down. 3. no turn signals. ive replaced wires. ran great for a day then all of this started to happen.Battery is new. Thanks in advance. I have received very helpful information from reading many threads here. CB