Jump to content

dray

Expired Membership
 View Profile  See their activity

  • Posts

    1,675

  • Joined

  • Last visited

 Content Type 

Everything posted by dray

  1. dray
    if ya feel like your gettin lucky and your way up on the gas tank STEP AWAY!!! FAST!
  2. dray
    :crying: I dont have a tape Player:crying::crying: So i just plug in my MP3. or my phone and use Pandora's internet radio or some times i use IHEARTRADIO. and suffer through with a very:big-grin-emoticon: dray
  3. dray
    prayers sent form our home to you and yours Dray and Carol
  4. dray
    http://www.cast-aways.com/codypics/IMGP2554%20(Medium).JPG Your ponytail's to tight I told you that was West
  5. dray
    that looks SHARP!!!
  6. dray
    kick the rear tire look at the front tire as your putting on the helmet fire it up if she aint a knockin Oil is fine NOW GO HAVE A GOOD TIME!!! sure wish i could go dray
  7. dray
    repack bearings after you clean them good by hand is fine. filling hub is waste of time and grease i didnt use 4 washers i used a 3/16's shim on one side and hammered it in OH MY im tracking a a tad to the left SO what ill live with it and you will never see it with out mic's eye ball the tounge it will be fine if your worryed about it put a square on it it will be ok the air pressure i run is a lot less then every one else says you should so find what works for you i still have both springs in mine but one or two one would be better for a lite load two is fine if you always have 50 + pounds in it i will add a bit later to the tounge and add a cooler rack when i do ill use a 2x2 tounge not the size it came with then the coupler will fit right and it won't need the shim
  8. dray
    LOL i go there every week just up- the road about 20miles lots of goodies:cool10:
  9. dray
    i use mine to offten to get rid of it but ill keep an eye open for one for ya! ill call a friend tomarrow see what he may know dray
  10. dray
    ran across this some of you may need to know about it http://www.postchronicle.com/cgi-bin/artman/exec/view.cgi?archive=217&num=312122
  11. dray
    see this is where a higher dollar faster bike would have been worth giving ( the gift of love ) all joking aside sorry to hear but there are better days ahead hang in there dray
  12. dray
    LOL now i could'nt think of a better reason!!! go get em:stirthepot:
  13. dray
    next time ill call OK!!! it was a last minute run wife said wanna and i said ill be outside and had er runnin:cool10:
  14. dray
    not me we went to frankenmuth today for lunch just me and the wife
  15. dray
    leather good always works for me! give er a boot in the A$$ and a belt in the mouth then id drink the scotch: not into wine much
  16. dray
    here is some info i been looking at them for a while too! http://mikenchell.com/
  17. dray
    i still have Alltel now Verizon: I feel they do a good job but not as good as it was when it was Alltel: check around as i know in other areas some phones are better; better offers deals/service not any one company is good everywhere I was much happier with alltel than verizon but its still better than the rest of the company's around here good luck
  18. dray
    Dang! you need one of these [ame=http://www.youtube.com/watch?v=E3mzhvMgrLE&feature=related]YouTube- SAWSTOP in TimeWarp[/ame]
  19. dray
    now that i look at it better it does look like a baby goldwing dont it did it come with studed snow tires?:rotf:
  20. dray
    Way cool buddy. But you didn't. Sell the trailer did ya? But that sure is one sweet looking ride:thumbsup2:
  21. dray
    i was going to go with the Icecream scoop; but the Beerfloat holder is just as good:smile5: dray
  22. dray
    Keith ? does your bike ride good when the trailer is off it? does it ride ok with the trailer empty ? does it ride weard only when the trailer is loaded ?
  23. dray
    yep i did the same thing over tightend the toung and it egg shaped the coupler went on the ball hard and had to beat it off with a block of wood and a deadblow hammer your going to need a new coupler the one on mine when i set the coupler on the toung there was a gap so i shimed one side and do not over tighten it just snug it up real good now under the coupler there is a nut it alowes you to adjust the tension of the coupler on the ball set it so it can move freely
  24. dray
    this is what i used on my V star and now i have a new one for the wing http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220611511730&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=fa2431871290a0aad0c66996fed0090b&rvr_id=&ua=WVI7&itemid=220611511730 works great
  25. dray
    heres a tidbit no one brought up check your coupler on the ball it may be overley tight you need it loose enough so it dont hold the bike when your trying to make small adjustments in the steering \ just take it off the ball and under neath the cupler there is a nut just back it off till it fits nice but you want it to move very free had a heck of a time with mine first time i took it out any thing over 40 would scare the crud out of ya! once I loosened up the nut a bit poof no more problems the coupler moves free now dray
×
×
  • Create New...