Jump to content

Dano

Supporting Member
 View Profile  See their activity

  • Posts

    4,378

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Dano

  1. Dano
    What gets me George, is he's saying that the switch is inbetween the positions. I would think that possibly the spring is bad or it's just worn out. Probably has both elements lit up, thats why the volts are dropping. Just like having too many lights on. I would be leary of the switch, tho. Dan
  2. Dano
    Hmmm, looks like "kill switch syndrome" is starting to affect the left handlebar now. Man this illness is traveling quick!! I hope a cure is found someday!!!! Dan
  3. Dano
    So George, have you already taken the rest of the day off to install your new prettys???? Dan
  4. Dano
    On the 1st gens, the rear brake reservoir is mounted above the master cylinder. It has a 14mm fill bolt located right near the corner of the unit. He is describing a good way to remove this bolt without breaking the reservoir. Dan
  5. Dano
    Check the connection where the sensor plugs into the wiring harness, may be some corrosion in there not allowing the signal to transfer. Also make sure your electrolyte covers the sensor as it's installed. Short of this being the problem, you could get rid of it by soldering a 2 ohm resistor in line. Dan
  6. Dano
    Had the same thing on mine, replaced the springs with new ones, did the trick. Also, no engine oil that says anything about "energy-conserving". You probably still have some friction modifiers in the plates that will work it's way out. Try the springs, tho. Dan
  7. Dano

    Wildhair

    Dano replied to FROG MAN's topic in Watering Hole

    BRAKES? WE DON'T NEED NO STINKIN' BRAKES! Good luck, Dan. Hope you get there and enjoy yourself for a bit. You deserve it. Hope everyone arrives safe and sound and returns home the same way!! Dan
  8. Dano
    No wonder it's not worn out!!! He rides sideways, the tires never on the ground!!!!!!! Dan
  9. Dano
    Good job on the change!!!! Check www.flatoutmotorcycles.com under parts finder. Cheapest and best for parts. Dan
  10. Dano
    KILL SWITCH STRIKES AGAIN!!!!!!! yOU "SMILIE" CREATORS NEED TO CREATE A KILL SWITCH SMILIE!!!!!! Dan
  11. Dano
    Bill, thought you had to have a reputation first to be able to uphold one!! You are doing a great job, in my erstimation, of keepin' it lively. 'Twixt you all the time and Squidley telling me to take it easy on the new guys, it ain't never boring 'round here! 'Cept maybe after midnight when all the younguns' go to bed early!!! That's why I don't get nuthin done around here!! WIfe keeps tellin me to get busy, then when she turns her back, here I am!! Keep up the good work!!!!!!! :bowdown: Dan
  12. Dano
    See Dan more proof I do exist! I wanna know where Mariner Fan is this weekend!!!!!! C'mon, Bob, where are you???? Seriously, looks like you got another relative there with Gentleman George! Glad you guys had a good and safe ride! Dan
  13. Dano
    Hmmmm,are you telling them the same thing over at the "wing" site there, Bill? I can see it now------ "Hey wingers, got them boys over at Ventureriders ALL riled up now!":stickpoke: :stickpoke: Dan
  14. Dano
    Ken, look forward to you making your way up here. Give me a shout if you need anything up here. Dan
  15. Dano
    Hamdavid, you can change your heading under USER CP to make your bike type appear where it says "member". You can also add a pic there so we can see your bike, too! Kinda what mine looks like. Dan
  16. Dano
    Shoot, gimme a late 60's muscle car, just weld'em in there!!!!
  17. Dano
    Thanks Ruffie! Great site! Just wasted 30 minutes looking thru there. Looks like it's easier to remove the whole mount bar, the rear probably needs it too! Dan
  18. Dano
    Anybody replace a front motor mount on a 97 Sebring convertible? I need the quick way to get it done so's I can go to Squids next weekend instead of dealin' with this!!!!!! BTW, crossover exhaust pipe nuts look pretty frozen, don't want to get into that situation!!!!! Any suggestions are 'preciated!!!! Gonna go eat dinner and look at repliess when I get done. Thanks in advance, Dan
  19. Dano
    Good luck and get back in that saddle!!!!!
  20. Dano
    I thought thats what got this thread started in the first place,,,,,, bashing sewing machines-- errrr- Wingers I mean!!!!!!!
  21. Dano
    Have you checked the parts finder at www.flatoutmotorcycles.com ? Great prices, good folks to do business with. Dan
  22. Dano
  23. Dano

    National anthem

    Dano replied to Condor's topic in Watering Hole

    Wow:happy65:
  24. Dano
    I have a factory manual 83-85, will check it when I get home tonite (late). It's got the pull out schematic at the back of the book that should show it. Should have a post on it up by 11:30 to midnite (my usual Venture time!).
  25. Dano
    Usually at the back end of a 1st gen!! Dan
×
×
  • Create New...