EtRider

Don, Make sure you get to Dorset and check out Robinson's general store. And the view from the old fire tower (if still available) just north of Dorset is awesome if you have never been there.

No Steamer, I did not know them personally but I know a couple of guys that worked the with man. Sad, very sad.

" We here in Seneca County are not very happy with Bender." Steamer, Same feelings from Ontario County - what was the judge thinking???

57 years young.

Gas !

See below, I copied this from a previous post--- ************************************************************************************************************************************* 05-03-2015, 06:02 PM #6 Ok boys and girls here's what I ran into today. The filter on the right is the one I just took off the bike. The one on the left is a new one purchased today from Wally World. The one on the left will not fit my bike. The top(center that has the threads in it) is flat to a slight convex shape, whereas the old one has a concave shape to it. This is the same filter I've been using for a long time. The manufacturer has changed the stamping process some way so be warned!!!! It won't fit my bike ("09 RSV) so I'll be opening boxes from here on out when purchasing a new filter. Kirby Life's not the breaths you take, but the moments that take your breath away! IBA # 35582 PGR Member ***********************************************************************************************************************************

I got 8000 on original Dunlops on my 2013 and I also monitored the pressure closely. I now have Michelin Commander 2 on it. Hope to get a lot more miles out of them.

I have a 2013 RSV and the connector to the Ipod controller in the saddle bag had a bad cable and made the radio controller go blank. . I unplugged the cable and every thing worked (except the Ipod connection). Not sure if 2011 had Ipod or not. That shouldnt get wet but maybe a coincidence?

I installed a pair for the front and they work great- except I had to modify them a little bit to work in the housings . If I remember right I had to shave off a little on the back side to make them fit on my 2013 RSV. Other than that, they light up great and turn to amber when turn signal is activated.

I just replaced both my worn out Dunlops last week with MCII 's and it seems to handle smoother and corners better than the originals.

I had to do what Larry suggests in post #8 above. After that, it worked fine. Just a little tweaking and all is good.

SHIMANO SPORT CAMERA Try this- Another option like the Go-Pro.

ENG2242- I see you have a 2013. How many miles did you get out of the tires?

Good Luck !!!

I never do. If is is tied down properly it wont go anyplace.

I dont see any issues with it. Compared to my first trailer I had its about the same height- !2" wheels and the tongue seems ok. I would look at it and like etcswjoe said- take it for a spin. 250 you cant go wrong,

I believe T6 is Shell Rotella T6 5W-40 Fully Synthetic Motor Oil‎ T5 is- Shell Rotella T5 10W-30 Synthetic Blend

From Carbon-One classified - (The original Carbon_One lift adapter attaches to the bottom of either a "05" - "09" RSTD or a "99" - present RSV. Using this adapter allows one to use any atv/mc jack to lift your bike safely. Made of solid steel you'll have years of use for as long as you own your bike. Some Larin and Harbor Freight jacks have short lift arms (12") so if you have one of these I add a safety bar to the adapter. Do make a note in any order if this feature is required. My adapters are 12 1/2" wide so any jack with 13" lift arms or longer can be used easily. ) I just bought one and quality made- would recommend it. Just look in member classified section for info on it.

Or this--

I have never had an issue with it being stored on its wheels. never seem to bother it at all.

Drivers Backrest

Trying to keep up with a 2nd Gen?

Have a wonderful time and congrats on your 25th Anniversary.

I checked a couple of times last night and no one was on. I will keep trying.