Jump to content

hydraulicman

Expired Membership
 View Profile  See their activity

  • Posts

    87

  • Joined

  • Last visited

 Content Type 

Everything posted by hydraulicman

  1. hydraulicman
    Keep up the good work, when I quite, 20+ years ago I found that a hard short run would help curb the feeling of need. Also ask God for help, remember Jesus strips were for our healing. Smoking is an addiction and need to be cured. I worked for me, good luck.
  2. hydraulicman
    I run "0" PSI in my front shocks and have found that air pressure is building up in the shocks. The right shock seems to build up faster than the left and I do not understand why. I removed the air valve this morning and noticed oil on the valve. This is making me wonder if the oil seal is leaking and that is what is causing the air pressure to increase. Has anyone seen this before? Would this be a warrenty problem? I have an 06 RSV that was purchased in 07 so I still have some warrenty left. Thanks for the help.
  3. hydraulicman
    I have had the Diamond R on my bike for about 3 years and my wife loves them. They are a bit tricky to mount but not that bad. The hardest part is geting them so that they are straight up and down, because they mount to the round hand holds.
  4. hydraulicman
    WOW thanks for sharing, what a great story. It was hard to finish screen got blurry.
  5. hydraulicman
    They replaced mine without any trouble.
  6. hydraulicman
    I Saw not able to fined them either
  7. hydraulicman
    I paid $120.00 for life time updates, only to have the Garmin unit fail about 9 months later. Found you can not transfer to a different Garmin.
  8. hydraulicman
    I would like more information on what appears to be signal lights. Where did you find them?
  9. hydraulicman
    Yes it makes a big differnce, mine was 3 years old. I noticed that the bike shifts better than before. I think the fluid line under the engine was getting hot enough to cause the fluid to start to boil, making the system spongy and not releasing the clutch totally.
  10. hydraulicman
    That realy looks nice, I would do that as well but the wife would kill me.
  11. hydraulicman
    I found a Prestone synthetic DOT 4 it says it is good for DOT 3 & 4 applications. Is this a good fluid for our Gen 2 bikes? Thanks for all your help.
  12. hydraulicman
    I used a garmin 750 that went south after 2.5 years. Just purchased a garmin 755, much the same as the 750. I wanted the mp3 player which is connected to the aux input. As far a water proof, I just put a small plastic bag over it when it looks like rain.
  13. hydraulicman
    Yes, but will the on/off oil switch carry the current load of the lights
  14. hydraulicman
    I planning to replace my rear brake pad and was thinking about the carbon lorraine pads. Has anyone used these pads and what do you think of them.
  15. hydraulicman
    I had a problem where the cruise control would kick out for not reason. However there was a reason, the hand brake lever was very loose. By adjusting the screw on the lever to take out most of the free play I solved the problem.
  16. hydraulicman
    If the tach is on the handle bar it looks great and I would like more information. Do you have the manufactors name and model number, also information on how you mounted the tach. Thanks
  17. hydraulicman
    I had the same problem, which was caused by the CB radio being on. Turned it off and everything was good to go.
  18. hydraulicman
    I would go back to the dealer, the 5 year warrenty should still be in service.
  19. hydraulicman
    I have the elite 3's on my 06 venture ride 2 up most of the time and I have 18,000 miles on them. I believe I can get another 2 thousand except I'm planing a long trip and think I will change them before I leave. Needless to say I'm happy.
  20. hydraulicman
    I put the Baron's on my 06 with the standard cables and never had a problem. You do have to slide the risers in from the side, but that was the only problem I had.
  21. hydraulicman
    It so cold out that I saw a Lawyer with his hands in his own pockets.
  22. hydraulicman
    If I livied in an area where this company operates, I would never spent one dime there.
  23. hydraulicman
    Got 25, Eisenhower was born in Denison Tx.
  24. hydraulicman
    My wife will not let me leave without her, she is 63 soon to be 64. She is an:337:
  25. hydraulicman
    My cruise control kicks off for no reason also, but only if I do not have my hand on the grip. As long as I have my hand on the grip it holds fine. Dealers said it is possible a problem with cable adjustment. Anyone have any ideas? Barry
×
×
  • Create New...