Big Lou

Had a ffriend one time, ,took an old battery and was throwing it up high in the yard and did this a dozen times said the plates all would become solid in the bottom from sitting,,, then he put it on a charger on medium over night, ,we used that battery at the fish camp to start the generator. All that summer, never jumped it off after we put it on,,,,started every weekend,,,,,,,,,,try. That, just dont bust it,,cant hurt

Mine leaked at the valve cover.. had to clean itt good then run it to figure it out,, ,409;! And a fleshlight

I use a wire brush on all rustedd bolts..junk yard trick,, Zip ties wont fix a muffler though... How is it running now?? Did you get it fixed

Yea, new tire,,tomorrow, The damage is right at the triabgle hole,, and i think i did pick up something and carried it for a while looking at the tire,, 3 holes are at the bottom, ,ffor the trim, mine didnt come with that trim when I bought it,, ,,thing is on all other bikes i rode it before, I could see the wheel,, not now,,,kind of why I asked about some protection from it happening again,,,,,CANT SEE IT I think,,not sure,,I may of smelled rubber once,,,,, I will get a tire before breafast in the morn,,

now THAT is a rolling couch

I have an 89 royale , all the plastic for sure sounds like from everybody that has posted here that your bikes came wuth a LOT more lights than mine ,, ,, all i seem to have is bare neccesities.. .. if you put these on where did you put them??? I would like fog. and a spot. . I seen the otherday a bike mounted driving lights on the saddle bag looking forward??? I am fixing to check the led. websight rite now

today cleaning for an afternoon cruise.. I seen this line on the tire ,front of course. seems something got in between the fender and the tire, where the brake line for the handle bar is ,,front brake ,,left ,right ,, ???? the clamp that holds the line from moving has a shiny spot on it where ,,whatever cut my tire went out .. is there suppose to be some type of fender mounted shield to stop this???? ..there is 3 holes on the bottom of the fender.. if so what does it look like,????>:>>>???>>> didnt quite get to the cords,, but last week in florida I was racing .. could of created a good BOOBOO,, the cut is about 1/16 in deep and 1/8 wide all the around

Eagle one ,,Gel wax when i first got my bike climbing the drive in the evening I couldn't see the ground or in front of me for haze and scratches on the windshield, FACING THE SUN I used the Eagle one , it has carnuba and silicone .. I can get home now without a worry,, narrow drive with sun on hazy windshield was NOT FUN.. FIRST TIME I RUBBED ON WITH MY BARE HAND now i got a cloth

Batteries left on a shelf will collect dust, with temp change, dew accumulates, along with grease,,wipe it good and it will take a slow charge,,,, Been there done that,,,,,,,just discharged cause of dirt, Clean and check level of water,,even maint,free batteries you can add water,,,distilled

ONLY IF YOU USE THE WORDS INFEDEL,,PRESIDENT ,AND SOME OTHERS ALL AT THE SAME TIME ,, BLACK SUITS COME TO VISIT FOR COFFEE,, THEY DONT BRING ANY I HEAR I CUSS FERNINORS REGULAR:rotf::rotf: FUNNIEST THING I EVER HEARD WAS A DUDE AT THE SHOP ANSWER HIS PHONE ""SHERRIFS OFFICE"" WHO EVER IT WAS HUNG UP:lightbulb:

I wanted to use leather or vinyl couldnt get it to cooperate with gloves and one hand

i took some clear and shot over it to shiny it just enough to match cleaned plastic I can access it going down the road with gloves , if it dont hold out the water i need then i will put a small bead of silicon around the hole to channel water ;; for real,, it does look plastic, it is light and will break on an impact instead of tearing up more plastic and weather wont hurt it,, my wires for my air ride are down inside it ,so i can hook it up and then put it away IF I DIDNT TELL YOU THE DOOR WAS AN OLD INNER TUBE AND THE WOOD WAS SCRAP WOULD YOU KNOW??????

you could use a carpet needle to fix the seam.. for now..15lb, fishing line..

I think BF goodrich is the best tire made wins almost all baja races

had a dog named patience once HAD NO PATIENCE FOR HER

Man now that is a cooler How much ice does it take

I started a thread for my box... just to cheap to buy one.. or rather do it myself ,, you choose

there is a little box next to the TCI box gets vacuum

I test fitted it 3 times , it does hold up the fairing to within 1/16 in. from the floor I wanted to match the plastic on the other side ,, it aint smooth or new the half moon at the top, for overflow ,i can see it and handle it with gloves so i took some undercoating and lightly run over it ,that gave the ripple ,then run over it with grill paint ... it dont dry completly black so will give the aged look..yet be new I wanted to do something like a roll top..so it would slide into itself ,came to the conclusion that may be a bad idea if i locked up brakes everything would slide forward and stop the slide of the top.. water is another factor .. so I will take a piece of inner tube and cover it ,then put a hole in the inner tube so it will stretch over a pin , maybe some vinyl..aint quit sure yet ,, need to access it with gloves if i am wearing them,,started raining an had to quit for the day.. :bighug:precious is coming right along:bighug: I think i will do this sitting on it cause i want to be able to get in and out of it riding down the road all of my inner plastic is busted that is why i neede it to be load bearing ,, outside is still blue so it is usable

sounds like me,, everything ..I cant make .an have to order,,, is a week away.. . the worst part is the biggest bike junk man in Alabama down the road said , nobody sends ventures to him,, they dont get scrapped,,cause they are still running!!!!! he has thousands of gold wings kind of made me feel good to hear that this bike dont break down much.. :080402gudl_prv::080402gudl_prv:

i ONCE WORKED ON A MACK KEPT DYING , 4 times that truck left the shop , towed back . left to run all day . nothing ..me driving, nothing driver was upset , finally i was outside washing it and it died started right back up .water killed it again.. wiring harness to the computer on the side of block .,. allmost to the back was shorted inside the harness ,, hard place to see or get to,, it had rubbed against the holder that tied it from bouncing another a freightliner ,, i could grab harness and shake it and truck would die ,, the freightliner had breaks inside coating ,,, it did NOT SHOW

1st, I was late for the test 2nd. I didnt study for it , thats ok I am skipping school now and forging a DR. excuse so Ill be around back waiting for school to get out .bring the test with you I will pay you then!!!!! AND HURRY IT IS STARTING TO RAIN

ok i took the CB AND CLASS , controller out ,, class still works , it is a treasured piece so dont leave it out no more here is the framing and the inside of the box. .. framing is done with cedar so in a crash it will still break and not destroy the plastic ,, inside is done with vynl same color as bike .. i got the top cut , will post pics of it tommorrow,, way this is built it will raise the side back up and give suypport also took me a whole 5 minutes to figure out how to make it load bearing.. had a headache ever since ,,, thinking is for smart people and way over rated

if you have a tie down ratchet strap put it on the center stand ,, ratchet strap the center stand pull front wheel let the bikedown on the forks ,, pull rear in a hurry 1 hour rear is so high no need to pull any plastic put forks on a soft cloth

brake fliud also eats rubber I worked for this guy at a junk yard and if a seal was leaking on a car he would pour in some brake fluid to stop the leak ,, steam clean the car and run it through the auction .. so all wires and rubber parts NEED TO BE CHECKED TOO man what a b#+%&