VentureFar

I totally agree. Two iron butt 1000's and two Sturgis runs from California can attest to the amazing comfort Rick puts into these seats. I just wish he did office chairs, couches and recliners too! VentureFar... Sent from my iPhone using Tapatalk

Thank you for your service and your sacrifice my friend. God's speed. VentureFar... Sent from my iPhone using Tapatalk

Thanks for the chuckle. VentureFar...

Just replaced my stock bulb on 07RSV with the PIAA anti vibration super white. Just to start with for any lurkers it took about 10 minutes. - 8 of the ten was fumbling. Turn the bars to the left stick your uncoordinated left hand in and pull off the power connector. Then pull the rubber boot straight off then push the metal retaining clip UP and out of its slot and bulb drops out.reverse the process to install but do not touch the glass of the bulb. The retaining clip slips into a slit and there is just enough spring tension to make it too hard for my left index finger. I remembered I had a foot long bent nose needle nose pliers and popped that sucker back in on the first try. What took the longest was getting the power connector three prongs back in position with one hand. I finally used a long screw driver as a poker/ helper from underneath to help with alignment. Voila. Done. Some time ago I noticed the left right adjustment knob had fallen off so I ordered a new in from Bikerbandit.com i did notice what others have mentioned that the center of the high beam is lower than the center of the low beam. But using a cardboard target I see that the top of the low beam is cut off. Put on the high beam and although the center is a bit lower, the overall beam shoots both above and below its center. VentureFar...

Rick glad to hear you are on the mend. Your work is amazing. Your engineering is expert. Have you ever addressed the flex in the frame? Neil. VentureFar...

Oh. I thought you were talking about the visionX light canons breaking. My bad. I love the light they give off. VentureFar...

Yep just like PUC said- he was just sitting on the curb waiting for the yackers to get done yacking.... VentureFar...

I ordered the PIAA ultra and should get it shortly. I will post when installed. VentureFar...

So sad. So senseless. VentureFar...

Did the visionX bracket break or the bracket you used to hold the visionX break? VentureFar...

Vision X light canons. 10 degree spots mounted on brackets off the mirror stalk. http://img.photobucket.com/albums/v468/ihavethespirit/BB201F14-B389-44E1-91E0-45B8D8569FB3_zpsdfo1ovj2.png VentureFar...

I have had other vision X led "passing lamps " but just got the 4" vision x canons. At 80mph dark night I can comfortably see to stop well within the range. I have them mounted using doubled up corner brackets mounted to the mirror stalks. If you want more light than you thought possible buy visionX light canons. I'll post a photo soon. Venture Far...

Amazing it doesn't say that anywhere on the packaging. Not nice. VentureFar...

If I open it up and take the two set screws out, wire brush them and reinstall with some gummy junk all will be right with the world again? VentureFar...

Anyone have experience with this PIAA Piaa 4.6 out of 5 stars 5Reviews PIAA PIAA XTR WHT H4 60/55 ANTI VIB Lighting Xtreme White Bulbs CLR- 70456 [*=center] [*=center]

I looked. It is permalock. I only used one drop on each of two screws. If it eats the baggershield in 2 years verses it flying off the bike in two years it will actually be a financial wash. I will call permalock on Monday and ask about the affectual distance of the harm. Thanks for the head's up. VentureFar...

I didn't use much but uh oh.

Darn iPhone. Windscreen FELL up not full up Coming down the off ramp after my 3500 mile round trip to Sturgis where of course the highlight was @cowpuc I saw light between my baggershield and the top of the dash on my 07. I came to a stop and literally my baggershield had come UP and almost out of the detents and certainly the two screws. I reached up and slide it into place and rode the last 2 miles home at 25mph. This morning I started unscrewing things to get to it and sure enough not only did both through screws disappear but all the screws that cinch the shield at each notch were loose. I replaced the missing 6mm screws but used blue locktite this time. Only 20,000 miles since i installed the baggershield. Love it by the way. I also noticed that the hinge screws on my left bag had come loose and I tightened them about one month ago. Again locktite-this time. Just sharing ... VentureFar...

It was the highlight of my 3500 miles to see you and Tip. The expression " the pleasure is all mine " is overused but in this case the please was all mine. You and Tip (and Tweeks) fully recharged my spirit battery. Thank you my good friend! Steven didn't have words for how much he enjoyed and appreciated our parking lot "family time". VentureFar...

This morning my knee feels pretty good. As long as I don't kick any roadkill I will be ok. VentureFar...

Monday night dinner is really taking on a life of its own! Will be great to meet so many new friends. Ride safe. VentureFar...

VentureFar is confirmed for dinner and pie. I'll be hungry around 6 pm. Old folks like Puc probably ate around 4pm during the blue light special but U.S. Youngin's don't eat they early. VentureFar..

That is terrific ! you can't miss me, I just bought a new neon yellow scorpion full face. Which I wear religiously!

you will know us by the weaving around the potholes. VentureFar...

parking lot is piece cake, I mean pie...except for the ponds on the left side of the parking lot :-) https://www.google.com/maps/@44.719773,-103.421781,3a,75y,198.23h,77t/data=!3m6!1e1!3m4!1sFTeOTkLwhDmLa1bEVaXINA!2e0!7i13312!8i6656!6m1!1e1?hl=en-US VentureFar...for a good piece of pie