Idle speed

[Thistledown]

I understand that the idle speed should be set to 1000 RPM. Other than not stalling, is there a reason for this? Suggestions on an inexpensive tachometer to but to set this the RPM, been doing it by ear

Thanks

[Yammer Dan]

Book calls for 900.

[Squidley]

I dont know if there is a specific reason other than possibly loading up the plug. I do know a few that set the idle to a lope as it sounds a bit meaner with aftermarket pipes

[SaltyDawg]

I keep mine at around 800 to 900.

[V7Goose]

Personally, I prefer the sound and feel of the engine idling about 700 - 800, but don't do it. The biggest concern is to keep enough hot oil pressure at idle, so don't go below the spec.

Goose