scott_sinky Posted August 10, 2008 #1 Posted August 10, 2008 Hi All, I just finished replacing my TID Unit, which went better than I expected. Anyway, now the emergency flashers and turn signals don't work. The front signal lights are on but don't "blink". The fuses all look ok. I did accidentally arc across the device that is hanging off the left side of the battery box. (I don't know what it is called) Everything else seems to be working fine. Any ideas? Thanks for your help. Scott
shighley Posted August 10, 2008 #2 Posted August 10, 2008 Hey Scott; Check to make sure the 4 way flasher switch is all the way "Off". Cycle it a few times and try the turn signals again. Good luck and ride safe, Steve
Dano Posted August 10, 2008 #3 Posted August 10, 2008 The unit hanging off the left side of the battery is your starter relay.......
GeorgeS Posted August 10, 2008 #5 Posted August 10, 2008 We will answer any and all Questions: However you must use the correct Nomenclature, for all highly technical questions !!
Condor Posted August 10, 2008 #6 Posted August 10, 2008 We will answer any and all Questions: However you must use the correct Nomenclature, for all highly technical questions !! Like thing-a-ma-jigs... Doo-hickeys.. chinga-deros, gizmos..... :-)
scott_sinky Posted August 11, 2008 Author #7 Posted August 11, 2008 I'm doin' the best I can on part descriptions. On another note, thanks to the input I received as well as searching older posts, I solved my flasher problem. The wires were unplugged. DUH! Scott
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now