Jump to content

Recommended Posts

Posted

Somewhere I remember seing a discussion about changing the side reflectors on the rear roll bars to lights. Been looking everywhere - can't find it! Can anyone point me in the right direction ? :confused24: No... not there...:shock3:

Posted

You can order the LED lights from JC Whitney; they cost about $45 for a pair. They are the exact size to replace the reflectors - just pry of the reflectors (just held on with two-sided tape) and stick on the LEDs. Run the wires through the inside of the crash bar and out the hole in the back. :080402gudl_prv:

Goose

Posted

Got my LEDs from JP Cycle. Took the first reflector off of the mount, big PITA, after that I kust double side taped them right to the reflector, haven't had a problem yet.

Posted
You can order the LED lights from JC Whitney; they cost about $45 for a pair. They are the exact size to replace the reflectors - just pry of the reflectors (just held on with two-sided tape) and stick on the LEDs. Run the wires through the inside of the crash bar and out the hole in the back. :080402gudl_prv:

Goose

 

Got them ordered, but the price is way up $69 a pair!

Posted

Got mine at Wally world about $6 each soldered long leads on and ran thru rails. I think Auto Zone has them also. I used epoxy to fasten them which I doubt if I neded, some double sided tape sounds good and can easily be removed.

ROY:bang head:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...