Jump to content

Recommended Posts

Posted

I have an old Motocomm headset that I used on my V-star connected to a small CB. Does anyone know if I can get an interface connection cable to hook up between that and the 5 pin Yamaha connector?

I will eventually go for a J&M set but for now I'd like to use the existing headset I have.

Any info is appreciated.

Guest gitarzan
Posted

I've that same JM set. No complaints, esp. for that price.

  • 6 months later...
Guest r-retzke
Posted

An Autocom headset can work with the Venture and similar DIN 180º 5-pin systems. This attachment shows how.

 

Rog in NH

 

[ATTACH]13285[/ATTACH]

  • 5 months later...
Guest Kurt Leopold
Posted

where can I find who sells the edsets I see mentioned?

Posted

I have that setup on my Vstar 1300 and I tried to swap speakers for better sound quality and found out that my J&M had 3 wire speakers vs 2 wire for the MotoCom. setup, I also tried a converter plug, that didnt work either, They must use a different wiring for the mike and speakers than the J&M, if you do succede, please let me know, I havent been able to find anything, so I have to have 2 helmets with different headsets, 1 for each bike. Good Luck.

 

 

I have an old Motocomm headset that I used on my V-star connected to a small CB. Does anyone know if I can get an interface connection cable to hook up between that and the 5 pin Yamaha connector?

I will eventually go for a J&M set but for now I'd like to use the existing headset I have.

Any info is appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...