Driver's Headset Cord

[Guest Brad25ca]

Has anyone tired to repair one of these? Unfortunatly, there seems to be a break in one of the wires about on inch from the female connector, and it looks like I will have to make a repair. Are they hard to work on?

[mbrood]

If yours is a straight 5 pin din on each end, you can use a keyboard extension cable, a midi cable... or you can repair the offending end...

 

http://www.oselectronics.com/ose_p112.htm

 

http://www.oselectronics.com/Images/pg_112/din_female.gif http://www.oselectronics.com/Images/pg_112/din560.gif

[Guest Brad25ca]

It's 5 pin, not the actual connector, but there seems to be a break about an inch from the end. So I will haev to cut out a piece & splice back together. It's the lower cord that connects to the CB controls.

[Guest Ken8143]

Has anyone tired to repair one of these? Unfortunatly, there seems to be a break in one of the wires about on inch from the female connector, and it looks like I will have to make a repair. Are they hard to work on?

 

I did that once but it was a messy job as the wires are so thin. And break easily again.