Switch Posted July 16, 2008 Share #1 Posted July 16, 2008 According to my manual on the '97 RSTD it shows oil quantity as follows: Total amount: 4.6 US qt. Periodic oil change: 3.7 US Qt With Oil filter replacement: 3.9 US qt. Now, If the manual shows 3.9 quarts required if the filter is changed how does that add up to 4.6 qts total? But what I really need to know is, if I change the filter, how many quarts should I put in? Secondly, if I don't change the filter this time, how many quarts should I put in? Link to comment Share on other sites More sharing options...
TEW47 Posted July 16, 2008 Share #2 Posted July 16, 2008 Its more like 3.5 qts. My 07 Venture takes 3 qts. to center of site glass. Don't go higher than the center of the sight glass!!! dIf you do it will be blown into the air box and it will run down the left side of the engine. tew47 Link to comment Share on other sites More sharing options...
KiteSquid Posted July 16, 2008 Share #3 Posted July 16, 2008 You can never get 100% of the used oil out of a motorcycle motor as the oil is shared with the transmission and there is a lot of surface area in the gears also in the oil passages. I assume the 4.6 Qt is for the initial fill, or after rebuilding. Like tew47 said above, fill to the center of the sight glass NO HIGHER!!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now