Jump to content
IGNORED

A very big thanks to danob11 and lonestarmedic!


skydoc_17

Recommended Posts

Hi To All,

When I purchased my 87' VR at the beginning of this year I was not new to the First Gen. VR but now that this bike is 21 years old I have had to dig into her a lot deeper than I had on my other VR. While changing out the old battery the dreded "Battery Fluid Low" sensor fell apart in my hands. After crying the blues on this site, danob11 sent me his old one for free! Well now I had a part but being a Machinist by trade electrical issues are like Greek to me. A short time after that I received an invite from a small group of riders from this site that live in my area, so after traveling about 50 miles from my house my Fusebox fell apart at 55 mph. My brother came with the trailer and drug me home and I missed the ride. After some paperclips and crazyglue I again started out for West Virginia to make it to the WV Skid-In, this time with the bike fully loaded and with Jean on the back. We didn't even make it out of the state of Pa. and again the fusebox crapped out!

I whinned on this site again:fiddle:, and Lonestarmedic sent me pics of his fusebox replacement, answered all of my questions and assured me that even though I am all thumbs with wire, I could do this! I bought a soldering gun, a new fusebox, a s***load of wire, and over the weekend of the 4th installed the battery sensor and the new fusebox. I only burned myself about 50 times, and I also found out that a soldering iron lights my cigars really well, but doesn't work for soldering after that without a good cleaning! So many problems went away after the new fusebox install, from poor charging to excessive amp draw when the brake lights were used to just flat not running! My most humble apologies to the riders I stiffed on my first outing and to Skid and his wife for not making it to the Skid-in. I also owe an apology to my wife Jean for dragging her to Bedford, Pa. and making her push me on the VR! Thank you once more for the help and friendship on this site, As I have gotten older I have found it harder to accept help from other people but the people on the VR.org site have softened my heart and I just wanted to say so.

I posted a few pics of the new fuse box, If anyone has any questions about where I got the parts or is struggling like I was, or needs some brackets made, Please just ask! I feel I need to "Pay it Forward" for the kindness you all have shared with me.

Ride Safe,

Earl

Link to comment
Share on other sites

Hi To All,

When I purchased my 87' VR at the beginning of this year I was not new to the First Gen. VR but now that this bike is 21 years old I have had to dig into her a lot deeper than I had on my other VR. While changing out the old battery the dreded "Battery Fluid Low" sensor fell apart in my hands. After crying the blues on this site, danob11 sent me his old one for free! Well now I had a part but being a Machinist by trade electrical issues are like Greek to me. A short time after that I received an invite from a small group of riders from this site that live in my area, so after traveling about 50 miles from my house my Fusebox fell apart at 55 mph. My brother came with the trailer and drug me home and I missed the ride. After some paperclips and crazyglue I again started out for West Virginia to make it to the WV Skid-In, this time with the bike fully loaded and with Jean on the back. We didn't even make it out of the state of Pa. and again the fusebox crapped out!

I whinned on this site again:fiddle:, and Lonestarmedic sent me pics of his fusebox replacement, answered all of my questions and assured me that even though I am all thumbs with wire, I could do this! I bought a soldering gun, a new fusebox, a s***load of wire, and over the weekend of the 4th installed the battery sensor and the new fusebox. I only burned myself about 50 times, and I also found out that a soldering iron lights my cigars really well, but doesn't work for soldering after that without a good cleaning! So many problems went away after the new fusebox install, from poor charging to excessive amp draw when the brake lights were used to just flat not running! My most humble apologies to the riders I stiffed on my first outing and to Skid and his wife for not making it to the Skid-in. I also owe an apology to my wife Jean for dragging her to Bedford, Pa. and making her push me on the VR! Thank you once more for the help and friendship on this site, As I have gotten older I have found it harder to accept help from other people but the people on the VR.org site have softened my heart and I just wanted to say so.

I posted a few pics of the new fuse box, If anyone has any questions about where I got the parts or is struggling like I was, or needs some brackets made, Please just ask! I feel I need to "Pay it Forward" for the kindness you all have shared with me.

Ride Safe,

Earl

Same thing happened to me, almost. Ain't this group great

Link to comment
Share on other sites

Boy Skydoc, I recognize the old panel and the new one very well!! Nice job on the repair. I like your variation on the mounting. Left you room for a nice set of accessories blocks. I'm glad that we could help on the idea. Now, do the 4 gauge battery cable upgrade and enjoy easy starting and plenty of electrical power. Bet your charge gauge event reads healthier.

 

JB

Link to comment
Share on other sites

Awesome job Skydoc! Talk about perfect timing! I am well past due on this project myself and got online specifically to search for JB's instructions on his install. I love this site! I'd definitely like to hear about your experience, and tips, and where you got your supplies. Thanks!

 

Carl

Link to comment
Share on other sites

Hey Earl, I am one of the guys you owe lunch from the first ride:bawling:and I thought we mite see you at the Skid In, glad to hear you got her running, went thru Bedford twice this weekend on way to Laurel highlands area. We need to try for another get together in Pa. Craig

Link to comment
Share on other sites

Thank You All for the kind words, I have a few sets of the terminal blocks left over and a bunch of the terminal connectors left over if anyone needs any of these items just send me a Pm or post it here and I will be more than happy to send them along to you free of charge. For those of you who are Electrically Challanged as I am I would be willing to Purchase the fusebox, prewire it, and send it along to you for only the cost of the fusebox and wire. All you would have to do is mount the fusebox, connect the old wires to the new fusebox and off you go! Let me know if I can Help!:whistling:

Ride safe,

Earl.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...