no turn signals

[labill]

I just put on 1 1/4 risers. Now I don't have any turn signals. Fuse is not blown. Throttle also is slow to return to idle when released. Horn, lights work.

 

I tried to open up the signal, light and horn assembly to see if I pulled the wires loose. Took out the bolt in rear but can't get the cover off.

 

Any suggestions on where to look or what to try.

 

Thanks,

labill

[Gary N.]

You must of pulled something loose. And your throttle cables are definitely too tight. You need to get behind the fairing and snip some ties or re-route the throttle cables. Don't try and drive it like that.

[labill]

Gary,

Thanks. Might just remove the risers instead of removing that faring.

 

labill

[RoadKill]

The fairing is not that hard. I think all you would need to remove is the front. In our Tech section their is a good article showing exactly how. Think its under AUX splliter install. Even I did it, so it has to be easy