Jump to content

Recommended Posts

Posted

Any one have advise on how to push up the air joint bracket to remove the spring wire clip so that the fork leg will drop down (shown manual page 5-30)

 

If it just pushes up it must take a 500 pound ape - cause mine won't move

 

Thanks all

Posted
Any one have advise on how to push up the air joint bracket to remove the spring wire clip so that the fork leg will drop down (shown manual page 5-30)

 

If it just pushes up it must take a 500 pound ape - cause mine won't move

 

Thanks all

 

The O rings inside stick pretty good, I use a brass drift & hammer to tap them up and off (from below).:080402gudl_prv:

Posted

Spray something like WD 40 on the Fork Legs, let it sink for a while and turn the Rings to left and right before prying them off. Once you got them moved, they will come up easily.

Posted

Thanks guys ....Sprayed with Crud Buster, left sitting for a few minutes.A section about 1 foot long of 1" sch. 40 pvc from uderneath and 1 tap with hammer did the deed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...