Easy air screw tool

[Numb Knuckles]

I made a quick carb air screw tool by flattening the end of a pc. of 5/32" x 4" welding rod and bending it in the middle to 90 degrees so that now I can adjust the front carb screws without having to remove all of the blasted plastic.

Gary:farmer:

[Dano]

Where's the pics??????!!!!!!!

 

Number 1 rule around here!!!!!

 

Dan

[Numb Knuckles]

Never done this:fingers-crossed-emo B4. Hope it works.

[Black Owl]

Great idea.

 

BTW, where are you located in MN?

 

[Cutty]

I made a quick carb air screw tool by flattening the end of a pc. of 5/32" x 4" welding rod and bending it in the middle to 90 degrees so that now I can adjust the front carb screws without having to remove all of the blasted plastic.

Gary:farmer:

I like to look at that screw when making a sensitive adjustment such as that is ( just my 2 cents ).

[greg_in_london]

I just ground off the end of a mortice lock key and made it into a screwdriver. It's a good fit and I can see how much the head turns much better than I would be able to see the screw.