Battery Fluid Low Sensor Damaged On First Gen!

[skydoc_17]

Hi to all,

I recently cheeped out and bought a battery from Advance Auto parts with a copon I got in the mail for my 87' VR. (total cost: $28.00) When I went to remove the old battery the resistor that goes to the plug for the battery fell apart in my hand! The plug into the battery is good and the wire to the resistor is still there. Now with the new battery I get the dredded "Battery Fluid Low" Icon on the dash. Lonestarmedic was kind enough to send me the post on removing the battery fluid low resistor out of the electrical system but I am thinking that since I still have a "wetcell" battery, the sensor would be a good thing. Does anyone know what size/value resistor goes in this circut so I can replace it? Or does anyone have the entire plug/ resistor line that they would like to sell? When Jean and I go for a ride, she keeps looking over my sholder and says... whats wrong with the battery, didn't you just replace it? (like 43 times!)

Thanks in advance for any light anyone might be able to shed on this problem.

Earl and Jean

[GeorgeS]

26H-82120-00-00

 

Stock part, any yamaha dealer, See " Yamaha motorcycle co. " web site, you can view the parts catalog, under " Star Motorcycles " Order on line, or by phone most any Yamaha dealer

[Dano]

I will look for the sensor I just took off of mine and send it to you, but you'll have to splice on your own plug. Hey, just found it, going out in the mail to you today.

 

Dan

 

Don't owe me nuttin', just take care of the Navigator!

 

Should have said as soon as I get your address! PM sent