Parting out an '86.

[Vickersguy]

I'm reluctantly parting out a '86 Royal.  I was going to restore it but I'm looking down 70 years old and I have a nice '83 .  Trunk, bags and side covers seem in fair/good shape.  Front end fairing is not as good, but parts of it are..  Has a class unit, TCI, CB, all those cruse control bits.  Bike has 125k miles so the carbs need more than a casual cleaning.  I'm running off with the coils and some other bits.  The balance will go to the dump.   Color is blue/black.  I just started taking it apart.  It might be a bit in the summer heat to get to a part but I will.  Rust might be an issue. Shoot me a note for what you need.  Shipping is from the east coast USA. 

[R.h.abbott]

I am in need of some fork parts. Do you still have the forks available?

And maybe a rear brake master cyl

[Vickersguy]

The rear master cylinder is junk.  Your profile indicates you have an '83.  Very few 86 fork parts will fit on your '83.

[Claahky]

Are any of these parts still available? Looking for the plastic terminal cover for the Class unit and CB 

[Vickersguy]

Hey Claahky, Just red your post.  I'll check.  Be right back with the word if I have one.  I probably do.

[lmgk77]

'83 XVZ1200 ..........

 

Looking for unseized rebuildable rear brake caliper....

 

Thanks for time and reply

 

Leo

[Vickersguy]

I'll go check, probably have one.  Take a bit to get it off.

[Vickersguy]

You have an 83.  The 86 brake calipers are completely different.  It won't fit your bike.

[lmgk77]

The original owner "upgraded" the rear caliper to the '86, wanted the improvement due to pulling a Bushtec.

[Vickersguy]

Wow, OK.  It will be a bit.  Got to take it off the machine. 

[lmgk77]

Thank you for your time and help

[lmgk77]

Check PM