Clutch slave

[Bruce Bakken]

Do I pump grease into the clutch slave fitting or something else hope I’m even calling it right   That fitting under the rubber flap. Thanks 

[luvmy40]

STOP!!!!

 

That is a bleeder valve for the clutch slave cylinder. DO NOT PUMP GREASE IN TO IT!!!!!

Unless you have removed the slave cylinder for rebuild and cannot get it apart.

Edited November 8, 2021 by luvmy40

[cimmer]

I would suggest you download the service manual for your 1983 Venture from here..  https://www.venturerider.org/manuals/1983-1985 Yamaha Venture Service Manual.pdf

This will give you the information you need on bleeding the brakes or any other service you might need to do to your bike.  

Under the rubber flap is a bleed valve for the hydraulic clutch. There are a few grease points on your 83 Venture but that isnt one of them. 

Rick F.

[Pasta Burner]

I’ve been wondering what that fitting was for