RoTorKev Posted March 9, 2021 #26 Posted March 9, 2021 Nice Puc! Forget the naysayers and haters of the 92. I was in the Army for twelve years, most of that time as a warrant officer and the M-9 was my assigned personal weapon. I have shot M-9’s that had had thousands and thousands of rounds put through them and some were likely older than I was, and not one ever failed to put rounds on target and I can honestly say I never had a malfunction. They are a little big and heavy, and not so glamorous, but they are reliable and accurate. 2 1
cowpuc Posted March 9, 2021 Author #27 Posted March 9, 2021 On 3/8/2021 at 7:56 AM, luvmy40 said: THE BAR Browning Automatic Rifle. On 3/8/2021 at 9:05 AM, MonsterBiker said: Winchester Model 1897 Also known as a "Trench Gun" https://en.wikipedia.org/wiki/Winchester_Model_1897 Monst NAILED this one!! Check this out!! 1
Idrys Posted March 9, 2021 #28 Posted March 9, 2021 48 minutes ago, cowpuc said: Monst NAILED this one!! Check this out!! And I thought this was a motorcycle club!!
MonsterBiker Posted March 9, 2021 #29 Posted March 9, 2021 3 minutes ago, Idrys said: And I thought this was a motorcycle club!! Some of us are "Dual Sport" 😁 And then others of us are of the "Triple Threat" variety. A dirty truck is a happy truck. I have a very happy truck...... 4
Flyinfool Posted March 9, 2021 #31 Posted March 9, 2021 2 hours ago, MonsterBiker said: Some of us are "Dual Sport" 😁 And then others of us are of the "Triple Threat" variety. A dirty truck is a happy truck. I have a very happy truck...... That ain't dirty. And what is that green thing out the front? That should be out the back to help that red one thru...... 1
WRIDR Posted March 10, 2021 #32 Posted March 10, 2021 4 hours ago, Flyinfool said: That ain't dirty. And what is that green thing out the front? That should be out the back to help that red one thru...... And what is that green thing out the front? Looks like a tow strap to pull that Beastie out of the Goo. Sure hope it is in the right spot; that section looks like Plastic to us non-knowledgeable ones. Rgds, WRIDR 1
MonsterBiker Posted March 10, 2021 #33 Posted March 10, 2021 Yeah, it's a tow strap. 😒 But because my skid plate was up against a rock under that mud it was replaced by a tow strap on the back to the red monster. The tow strap on the front was attached in the right spot, that is one of the factory tow hooks. But.....all that plastic is about to come off. I just bought a 12,000 lb. winch and have an off-road bumper with winch mount ordered. I am in the very beginning stages of building that little truck into an overlanding rig. A 3" lift and 33" BFG KM3 Mud-Terrains are in the plans. It is going to be a multi-year project but it will be an extremely capable little 4x4 when I am done. It is actually quite capable now in stock form. If it hadn't been for the rock up against the skid plate that stopped my forward progress I would not have had any trouble with that mud hole. This just happens to be one of the rare GMC Canyons with the factory installed 5.3L V8. 😁 3
MonsterBiker Posted March 10, 2021 #34 Posted March 10, 2021 9 hours ago, WRIDR said: Looks like a tow strap to pull that Beastie out of the Goo. Rgds, WRIDR It's funny you called it a Beastie. It's nickname is "Baby Beast" or "BB" for short. My daughter calls it a "pocket sized monster truck". 😆 1
cowpuc Posted March 10, 2021 Author #35 Posted March 10, 2021 SNAP CAPS finally came in!! Now I can work out developing trigger group fire control,,, sooo much fun!! Like shooting my 1911, I got enough of them and bought the ones that are actual 124 grain dummy rounds that I can randomly sew them into Tony's 17 round mags for monitoring my trigger control during actual firing. I am really enjoying the change over from Tony's DA trigger to his SA trigger, definitely challenging in control. The stock hammer spring on the 92 is 20 pounds, I have 16, 17, 18 and 19's pounders coming. I am told the "normal" thing the Beretta guys do is drop to a "D" spring (16 pounds) to cut back on DA trigger pull. I would have just gone that route but I wonder just how usable that 16 pounder will be for rimfire usage. Plan is to try the 16 first and if I do not get any FTF's in my 22lr conversion kit I will go ahead and order 12, 13, 14 and 15 pounders to adjust downwardly until I do get the FTF's.. Like learning to slow ride in a parking lot = Practice practice practice!! 1
videoarizona Posted March 10, 2021 #36 Posted March 10, 2021 (edited) On 3/5/2021 at 5:15 PM, Pasta Burner said: @cowpuc is that a 9mm? I’ve never liked 9’s as I’ve always found them squirrelly except my buddy has a Beretta Px4 that is solid. Never shot your new baby. For me I’ve got a few but my go to on target most comfortable and ruined most all other grips is my PK380. When I unholster and level I always think “why can’t they all be like this?” I might “Accidentally” buy the wrong ammo if I know what tool I’d like to use it in. Looks just like my PK380. Really fits my hands nicely! Plus it's a joy to shoot as I can easily work the slide with my aged hands! LOL about being in the mud with the truck. I'm off to run the Mojave Trail road in 2 weeks. Tent camping all the way! I do enjoy overlanding now too! 2015 GMC Sierra 1500 Denali. 33inch BFG K02's. Stock. Edited March 10, 2021 by videoarizona add 4
Pasta Burner Posted March 11, 2021 #37 Posted March 11, 2021 31 minutes ago, videoarizona said: Looks just like my PK380. Really fits my hands nicely! Plus it's a joy to shoot as I can easily work the slide with my aged hands! LOL about being in the mud with the truck. I'm off to run the Mojave Trail road in 2 weeks. Tent camping all the way! I do enjoy overlanding now too! 2015 GMC Sierra 1500 Denali. 33inch BFG K02's. Stock. Is that the pearl color? I had a 2015 Suburban with metal flake pearl she was gorgeous. Gonna have to google the Mojave trail. 1
videoarizona Posted March 11, 2021 #38 Posted March 11, 2021 17 hours ago, Pasta Burner said: Is that the pearl color? I had a 2015 Suburban with metal flake pearl she was gorgeous. Gonna have to google the Mojave trail. White Diamond Tricoat. 1
cowpuc Posted March 12, 2021 Author #39 Posted March 12, 2021 My very first attempt at entering into the world of speed holsters!! Came out real nice IMHO!! I ended up going by the Guga Ribas youtube video instructions for fitting and it came out fine!! Quite a lengthy process but not bad (see vid)..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now