Rear trunk

[Noon Day]

I will need to replace or remove my rear trunk on my 2000 mm because of extensive cracks to the bottom of the trunk. Anyone have a trunk that would work or a suggestion on permanently removing the trunk?

[rbig1]

you left faster than I can type. guys have any pics of trunks you have retro fit on a gen2

[XV1100SE]

Wasn't there a recall on the early 2nd Gen Ventures? They added more support under the bottom. Not sure if it would help 20 years later but you could ask a Yamaha dealer to check if yours was part of the recall and if it had been "fixed".

[slowrollwv]

All the trunks are the same from 99-13. They added four pieces of metal to the bottom for support. There is always a few trunks on Ebay if you want to replace yours.

[Freebird]

I think only the '99 models were missing the additional supprort and large washers. They didn't actually recall them but came out with a free support kit. Nothing was sent out to owners but members of the forums and etc. became aware of the fix.

[JDaniel]

I had a body shop repair the cracks in the base of my trunk on the 99 RSV. I then cut a piece of 1/4 inch plexiglass to match the base of the trunk and mounted it to it. No problems after that.

[Phrog]

Ebay. And if you're lucky, you'll find one the same color!