Midnight Venture Handlebars Suggestions

[YellowknifeNWT]

Hi All;

 

Looking for information regarding swapping out the stock handlebars on my 2007 Midnight Venture, what if anything is available? not looking to have to change any cables.

 

Thanks In Advance

[slowrollwv]

I put the RSTD bars on mine. You will have to re rout the cables but they do work. They are a little wider and gives you a little more pull back. Some have put Harley 10 in. apes on but had to change cables.

[Sylvester]

I put the RSTD bars on mine. You will have to re rout the cables but they do work. They are a little wider and gives you a little more pull back. Some have put Harley 10 in. apes on but had to change cables.

 

I second this.

 

[Freebird]

I put the Flanders bars on my '99 and really liked them a lot. I later bought an '07 and put the RSTD bars on it. They were fine also. I actually liked the Flanders just a tad bit better but I don't think that they make them any longer and you can probably pick up a set of RSTD bars a bit cheaper. Either work well. I didn't have to replace the cables for either installation but I later did replace everything with Stainless Steel.

[YellowknifeNWT]

I put the RSTD bars on mine. You will have to re rout the cables but they do work. They are a little wider and gives you a little more pull back. Some have put Harley 10 in. apes on but had to change cables.

Thanks, my misses has the RSTD triked out and I am changing out her bars so I'll take a look at putting her stock bars on my venture.

[YellowknifeNWT]

I put the Flanders bars on my '99 and really liked them a lot. I later bought an '07 and put the RSTD bars on it. They were fine also. I actually liked the Flanders just a tad bit better but I don't think that they make them any longer and you can probably pick up a set of RSTD bars a bit cheaper. Either work well. I didn't have to replace the cables for either installation but I later did replace everything with Stainless Steel.

You mentioned Flanders Bars, do you have the part number?

[Freebird]

I was told that they no longer make them but I'm finding them on the Flanders website so I'm not sure. The part number should be 650-08761. Here is a link to the Flanders page: http://www.sideroadcycles.com/ImportedMotorcycles/ImportHandlebars/ImportMore/ImportRoadG.html

[YellowknifeNWT]

I was told that they no longer make them but I'm finding them on the Flanders website so I'm not sure. The part number should be 650-08761. Here is a link to the Flanders page: http://www.sideroadcycles.com/ImportedMotorcycles/ImportHandlebars/ImportMore/ImportRoadG.html

 

 

Thank You !!