Finally found a source for Gen I MKII electrical connectors, need to gauge interest

[M61A1MECH]

For many years I have had requests from GEN I riders to make trailer harnesses and break out harnesses like I do for the GEN II Royal Star bikes.

 

I finally found a source for the 13 pin connectors used on the GEN I MKII 1990 to 1993 bikes, I do not have them yet, the supplier has to special order them and is negotiating price and delivery, they expect to have them available to me within 3 to 6 weeks. I have put 4 sets on advance order with them on the speculation there will be a renewed interest in my products.

 

If you are interested please reply to this thread or PM me so I can gauge interest and plan accordingly.

 

Thanks

M61A1MECH

[OutKast]

Too make it more interesting, how about extra connectors coming off of it for LED lighting, such as additional tail, stop, and turns? I already have a 5 pin trailer connector and I am planning on running all the add on tail, stop and turn wiring to this same connection to minimize modifications to the factory wire. Some additional female spades or 5 pin connector for this would have been helpful.

 

Unfortunately, my harnass has already been tapped, so I will just go with it.

 

For many years I have had requests from GEN I riders to make trailer harnesses and break out harnesses like I do for the GEN II Royal Star bikes.

 

I finally found a source for the 13 pin connectors used on the GEN I MKII 1990 to 1993 bikes, I do not have them yet, the supplier has to special order them and is negotiating price and delivery, they expect to have them available to me within 3 to 6 weeks. I have put 4 sets on advance order with them on the speculation there will be a renewed interest in my products.

 

If you are interested please reply to this thread or PM me so I can gauge interest and plan accordingly.

 

Thanks

M61A1MECH

[M61A1MECH]

Too make it more interesting, how about extra connectors coming off of it for LED lighting, such as additional tail, stop, and turns? I already have a 5 pin trailer connector and I am planning on running all the add on tail, stop and turn wiring to this same connection to minimize modifications to the factory wire. Some additional female spades or 5 pin connector for this would have been helpful.

 

Unfortunately, my harnass has already been tapped, so I will just go with it.

 

I should have been a bit more clear in my original post, the basis for the trailer harness is a break out harness with 5 leads ( ground, brake, left turn, right turn and tail lights) those leads can be spliced to the trailer converter/ Isolator or used to add additional lighting.

 

My plan as with my 2nd Gen parts is to offer the break out harness as a separate item for those who want to do just what you described in adding more lights to the rear of the bike.

 

Also when I make the trailer harness I always include an extra set of tag wires spliced in for those who want to do both, add a trailer set up and add more lighting.

[M61A1MECH]

OK, Update, I have the connectors in hand, I have one breakout on the way to the first customer and a second harness made and ready to ship.

 

I will post the offering in the Member Vendors section soon, but for now here are some photos.

 

The price as pictured will be $15.00 delivered to the lower 48, add $8.00 if shipping to Canada.