What tools do I need to Replace Starter Clutch

[Chaharly]

Hey guys. Installing the Stator, R&R, and new Starter Clutch ASAP but I have to gather up some tools first.

 

I think I'll need:

 

Harmonic Balancer Puller (which I'll rent from O Reilleys)

Metric Allen Socket Set

3/8 Drive Torque Wrench

Philips head Screw Driver

Black RTV Silicone

Crank Case Cover Gasket and Middle Gear Cover Gasket

Loctite

 

Anything else??

 

I've never done a stator before so this could be interesting:snow:

[Flyinfool]

1/2 drive torque wrench for the flywheel bolt.

 

Scratch the Philips screwdriver and get a JIS screwdriver or you are almost guaranteed to strip out the screw heads. An impact driver with the JIS bit is the best choice for the stator screws.

 

AND a big box of patients to get the flywheel off.

[snyper316]

Fool forgot the BFH! The best song for getting that flywheel off is this classic. Trust me it works.

 

 

Sent from my LG-M255 using Tapatalk

[snyper316]

https://www.venturerider.org/forum/showthread.php?135150-Stator-Clanky-grindy-starter-Not-sure-what-it-is-going-on

 

This is the fun I had last year.

 

Sent from my LG-M255 using Tapatalk

[Chaharly]

What size are the bolts that i need to use with the puller? Like what thread? I gotta drive 30 miles to work on this bad boy so i'd like to know what bolts i need! Someone said you also need to replace the allen bolts on the starter clutch. Does anyone know what size these are as well?