Vogel 2019

[Motorcycle Mike]

I forgot to RSVP till l today, if anyone else needs to RSVP here is the link: https://www.venturerider.org/forum/calendar.php?do=getinfo&e=516&day=2019-8-14&c=1

 

Thanks for the link Joe. I had forgot also.

[Woody]

Bobbi put in a request for Diet Grapeco and said don't forget the wine.

 

Dad came up to visit this past week end and left us something special to bring to Vogel

[etcswjoe]

Dad came up to visit this past week end and left us something special to bring to Vogel

 

[etcswjoe]

Looked on the reservations page today for the park and there are plenty of spots still available.

[Woody]

that's right everyone get your reservations in it will be time before you know it. I have the case of wine and a few small items for the St Judes auction.

[Woody]

I got to get Trina a new cord for her helmet before Vogel but I hate to buy the entire headset for a cord. Does anyone know can you order just the cord for a Harley?

[Freebird]

It may depend on what brand of headset you have. I know that with J&M and most others the cord is two piece and you can order a new lower cord for different bikes. Example, my Star Venture uses the same cord as the Harley and still had the cords from when I owned my Road Glide. They work fine on the Star Venture.

Edited June 23, 2019 by Freebird

[cowpuc]

My 1st 1st Gen came with headsets and cords.. Will those cords work on this modern stuff? @Woody, can you snap a pic of the plug-in on the upper cord and on where the lower cord plugs into your scoot? I may be able to set you up for free!

[Woody]

It may despond on what brand of headset you have. I know that with J&M and most others the cord is two piece and you can order a new lower cord for different bikes. Example, my Star Venture uses the same cord as the Harley and still had the cords from when I owned my Road Glide. They work fine on the Star Venture.

 

I did not realize that the new venture was the same, I checked with J&M once before. Good information though

[Woody]

My 1st 1st Gen came with headsets and cords.. Will those cords work on this modern stuff? Woody, can you snap a pic of the plug-in on the upper cord and on where the lower cord plugs into your scoot? I may be able to set you up for free!

 

Thanks Puc, I don't think they will and yes I will snap a picture. I might need to start another thread or maybe just hijack this one, I'll talk to myself about it

[Woody]

could not get the pictures to upload will try again later

[cowpuc]

could not get the pictures to upload will try again later

 

 

 

[Woody]

 

Hey Puc thanks for the help, I didn't have time earlier today to finish. Storms rolling through and lights blinking so I shut the old puter down

[cowpuc]

https://www.venturerider.org/forum/attachment.php?attachmentid=116832https://www.venturerider.org/forum/attachment.php?attachmentid=116833

 

Hey Puc thanks for the help, I didn't have time earlier today to finish. Storms rolling through and lights blinking so I shut the old puter down

 

Looks great @Woody,, perfect shots! I will dig around here and see what I can come up with.. Been a LONGGGG time since I seen the cords for ours (they came with our 1st 1st Gen back in 87 that was the only Royale I have owned), I am almost positive I know where they are, will dig em out and see what I got.. You need just one or is the passenger cord that you have in just as bad as shape?

[djh3]

I may be mistaken, but I believe the 1st and 2nd gen Ventures used a 5 pin plug cord. The same as older GW. Harley used that for awhile too. But somewhere along 2010 or so GW and HD went to 7 pin.

[cowpuc]

https://www.venturerider.org/forum/attachment.php?attachmentid=116832https://www.venturerider.org/forum/attachment.php?attachmentid=116833

 

Hey Puc thanks for the help, I didn't have time earlier today to finish. Storms rolling through and lights blinking so I shut the old puter down

 

I may be mistaken, but I believe the 1st and 2nd gen Ventures used a 5 pin plug cord. The same as older GW. Harley used that for awhile too. But somewhere along 2010 or so GW and HD went to 7 pin.

 

Well,, I've been scouring the upstairs in my garage and unfortunately my cords were not where I thought they were,,,,, must have given em away to another lop eared CTFW varmint along lifes trail.. I did find my old headsets though and can verify that what DJ is talking about is spot on. Those old units were indeed 5 pin so at least know we know now what wont work. My apologies @Woody, I honestly thought we were onto something.. Oh well,, we tried

 

 

[Woody]

Thanks Puc I'll probably just order her one the old one still works but as the picture shows it's not looking good

[cowpuc]

Thanks Puc I'll probably just order her one the old one still works but as the picture shows it's not looking good

 

You betcha Woody, you are welcome.. All the best in finding a replacement brother!!

[djh3]

This is what the 5 pin looks like. I have connectors for them. LOL

[Woody]

I got her one Thanks everyone and just so we stayed on subject I had to get before we go to Vogel in August

[etcswjoe]

So you are going to be able to talk to the rest of us this time

[RandyR]

anyone else want to make a run to the Fatz restaurant in Blairsville this year?

 

https://fatz.com/locations/blairsville-ga/

[Woody]

So you are going to be able to talk to the rest of us this time

 

 

Maaaaybee

[Woody]

anyone else want to make a run to the Fatz restaurant in Blairsville this year?

 

https://fatz.com/locations/blairsville-ga/

 

Looks good to me

[DragonRider]

No question about it.................Fatz on Wed. nite and maybe another nite also.

 

 

anyone else want to make a run to the Fatz restaurant in Blairsville this year?

https://fatz.com/locations/blairsville-ga/