Toeman Posted July 12, 2018 #1 Posted July 12, 2018 I just purchased a CB antenna for my RSV as it was missing when I bought it. I looked up the part number and ordered it from Bike Bandit. It arrived yesterday and I installed it. I noticed that it is virtually identical to the radio antenna on the left side of the bike. In addition I cannot seem to pull up the embossed metal cylinder portion at the bottom to allow it to collapse. I happened to notice a RSV for sale in the classified section of venture rider and noticed that his cb antenna is a whip antenna and does not have the black coil in the middle of the antenna. I looked up the yamaha part number again to confirm that it was indeed a cb antenna. Does anyone know if the cb antenna is supposed to have the black coil structure in the middle of the antenna and if it can be folded over? Thank you,
Freebird Posted July 12, 2018 #2 Posted July 12, 2018 The CB antenna should absolutely have the load coil. Look at part number 35. https://www.bikebandit.com/oem-parts/2005-yamaha-royal-star-midnight-venture-ca-xvz13tfmtc/o/m145390#sch524850
Toeman Posted July 12, 2018 Author #3 Posted July 12, 2018 The CB antenna should absolutely have the load coil. Look at part number 35. https://www.bikebandit.com/oem-parts/2005-yamaha-royal-star-midnight-venture-ca-xvz13tfmtc/o/m145390#sch524850 thanks so much. Makes me wonder if the antenna I have on the left side of the bike is actually a cb antenna. Does the radio antenna have a loading coil? Shouldn't the cb antenna collapse as well?
Freebird Posted July 12, 2018 #4 Posted July 12, 2018 OK...ignore what Don just told you. He got the first half wrong and the last half right. The CB antenna goes on the left side. AM/FM antenna on the right side. They both fold. The AM/FM antenna does NOT have a coil and should be on the right side. Antenna with the coil is the CB antenna, LEFT side. If you trace the wire from the bottom of the CB antenna, it should go into the box under the trunk.
The Tooch Posted July 13, 2018 #5 Posted July 13, 2018 (edited) Ya! What Don said! .......No, not that Don, the other Don.....the one that was right! Never mind....... This is how they should look.......and they both fold forward. Edited July 13, 2018 by The Tooch
sydem Posted July 13, 2018 #6 Posted July 13, 2018 Over the years I have tried numerous times and many different ways but could never get my to fold. It should would be handy on a rainy day like today when the cover goes on at work. Help?
Condor Posted July 13, 2018 #7 Posted July 13, 2018 (edited) Over the years I have tried numerous times and many different ways but could never get my to fold. It should would be handy on a rainy day like today when the cover goes on at work. Help? The knurled sleeve pulls straight up and will turn to unloosen if it's jambed. Over time it can get jambed down really tight and you need a 'tool' to get it to move. A soft rag and channel locs will work. A little lube will keep it from happening again. Here are a couple of pics of what the CB Antenna looks like and what's under the sleeve. For those sharpies that are really observant you'll notice that the CB is mounted on the Radio bracket. The CB has about a 2' co-ax. The radio co-ax is longer and runs to the front of the bike. They came that way when I bought the set... Easy fix..someday..:-) Edited July 13, 2018 by Condor
sydem Posted July 13, 2018 #8 Posted July 13, 2018 Thanks for the info but my look different than the ones you pictured. I tried penetrating oil, channel locks with a piece of rubber and all I can accomplish is to loosen/tighten the whole antenna.
Freebird Posted July 13, 2018 #9 Posted July 13, 2018 Those look like antennas from a '99 model. About the only thing that Yamaha changes on these bikes for the entire production run was the antennas. I wonder if somebody installed '99's on your bike for some reason. If so, you should just change them both out to the later model style. Never mind, I see that you DO ride a '99 so yours are not the same as what we are discussing. The '99 antennas were a bad design. They would also get corrosion where the antenna is supposed to be press fit over a metal stud and cause reception and transmitting issues. Most people changed them out fairly early on. You can go with the 2000 and later RSV antennas or switch to an aftermarket antenna. I have Firestiks on my 2005.
BratmanXj Posted July 13, 2018 #10 Posted July 13, 2018 OK...ignore what Don just told you. He got the first half wrong and the last half right. The CB antenna goes on the left side. AM/FM antenna on the right side. They both fold. The AM/FM antenna does NOT have a coil and should be on the right side. Antenna with the coil is the CB antenna, LEFT side. If you trace the wire from the bottom of the CB antenna, it should go into the box under the trunk. Those look like antennas from a '99 model. About the only thing that Yamaha changes on these bikes for the entire production run was the antennas. I wonder if somebody installed '99's on your bike for some reason. If so, you should just change them both out to the later model style. Never mind, I see that you DO ride a '99 so yours are not the same as what we are discussing. The '99 antennas were a bad design. They would also get corrosion where the antenna is supposed to be press fit over a metal stud and cause reception and transmitting issues. Most people changed them out fairly early on. You can go with the 2000 and later RSV antennas or switch to an aftermarket antenna. I have Firestiks on my 2005. Just looked out my office window and my '99 has the old style antenna on the WRONG sides. I don't use the CB and honestly never notice poor (any worse than the car) AM/FM reception. 1. Does anyone know the OEM part numbers for the later model antenna? 2. Is there a reason to go Firestick vs OEM?
Freebird Posted July 13, 2018 #11 Posted July 13, 2018 OEM part numbers can be found in the link that I provided in post #2 of this thread. Firestik makes a very good antenna but either will be fine. Yamaha just wants STUPID HIGH prices for the OEM antennas.
Condor Posted July 13, 2018 #12 Posted July 13, 2018 Those look like antennas from a '99 model. About the only thing that Yamaha changes on these bikes for the entire production run was the antennas. I wonder if somebody installed '99's on your bike for some reason. If so, you should just change them both out to the later model style. Never mind, I see that you DO ride a '99 so yours are not the same as what we are discussing. The '99 antennas were a bad design. They would also get corrosion where the antenna is supposed to be press fit over a metal stud and cause reception and transmitting issues. Most people changed them out fairly early on. You can go with the 2000 and later RSV antennas or switch to an aftermarket antenna. I have Firestiks on my 2005. That's what I did on my 99. It took a little McGuivering 'cause I wanted to keep the 99 co-ax. I can't remember exactly what I did but it had something to do with the tearing the connector apart and putting it back together somehow??. MY 99
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now