Jump to content

Recommended Posts

Posted

what would cause small backfires when decelerating ? this is a new to me 2011 rsv and im wondering if its normal, its' not lound or bad flame shooting back fires but it never happened on my 83 rsv.

Posted

Make sure the vacuum hoses are connected to the AIS valves. Years ago in automotive we used to call these "anti backfire valves" and for good reason.

 

Mike

Posted

I agree that carb sync is the first thing to do. There were also some issues with some of these bikes where there was a bad weld on the exhaust. Most were on the left side right where the two pipes merge. Pinhole leak that allowed them to suck in air and cause them to do that. With it idling, you can usually feel if there is a leak there. If so a simple solution is to clean that area with a wire brush and put a little JB Weld on it. It's on the back side so doesn't show.

Posted

Does your bike have aftermarket pipes? Mine would do it with Sampson Fishtails, put RK pipes on and no more backfire.

 

Craig

Posted
I agree that carb sync is the first thing to do. There were also some issues with some of these bikes where there was a bad weld on the exhaust. Most were on the left side right where the two pipes merge. Pinhole leak that allowed them to suck in air and cause them to do that. With it idling, you can usually feel if there is a leak there. If so a simple solution is to clean that area with a wire brush and put a little JB Weld on it. It's on the back side so doesn't show.

 

Freebird

 

Funny you mention that. I noticed a leak right in that same area on mine. I actually replaced the gaskets on both sides thinking that was it but it is still leaking on the left side. I'm going to have to check that out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...