camos Posted March 18, 2018 Share #1 Posted March 18, 2018 For the past week or so when starting the engine from cold the tach takes its time to get up to speed. Once running it appears to work properly. Anyone know what might be the cause? Link to comment Share on other sites More sharing options...
mraf Posted March 18, 2018 Share #2 Posted March 18, 2018 I have seen the same thing with my tach. I went so far as to tear the tach apart to see if it could be rectified by lubing it up. It can be loosened up to work more freely for awhile but it would go back to its sluggishness self when the weather became colder. I am tired of fighting it and just ignore it. After riding for awhile it will begin to act like it should. I was told that a sluggish tach could be a problem with the TCI box. To see if this was the problem I bought a used box on e-bay. The tach still acted the same. I upgraded to the programmable TCI box by ignitech some years ago and still have a sluggish tach so I do not believe that was the problem ether. It is just tired. The tach gets its signal from the number 2 coil which could I suppose be a problem but my venture runs tip top with mileage in the 40's and all cylinders firing and coming up to temperature correctly using a infrared temp gun. If you find a long term lube fix for it I would be interested in what you used. Link to comment Share on other sites More sharing options...
Marcarl Posted March 18, 2018 Share #3 Posted March 18, 2018 I would say that the monkey who's job it is to move that needle is in need of some warm-up juice. Maybe he's a bit ticked that you get your shot now and then but you leave him out. Link to comment Share on other sites More sharing options...
camos Posted March 19, 2018 Author Share #4 Posted March 19, 2018 The tach worked perfectly all winter and did not become tardy until the temps came up although it is still a bit frosty when starting early in the morning or late at night. It isn't slow when starting during the day when it is warmer or even after running for a few seconds. Seems to be normally responsive after the initial slow start. I guess it could be a poor connection that is worse when it is cold. If I could catch sight of that monkey I'd offer it a 30/30 pill. Link to comment Share on other sites More sharing options...
videoarizona Posted March 19, 2018 Share #5 Posted March 19, 2018 http://www.venturerider.org/forum/showthread.php?22608-tach-fix Link to comment Share on other sites More sharing options...
JDaniel Posted March 19, 2018 Share #6 Posted March 19, 2018 Maybe it's on daylight savings time. Link to comment Share on other sites More sharing options...
camos Posted March 20, 2018 Author Share #7 Posted March 20, 2018 http://www.venturerider.org/forum/showthread.php?22608-tach-fixYou found the likely answer to my question, courtesy of mraf back in 2008. Link to comment Share on other sites More sharing options...
gaj1917 Posted May 20, 2018 Share #8 Posted May 20, 2018 Just got the old Venture out of storage this week. I've been struck with the slow tach syndrome! Glad to have found this thread, as I wasn't looking forward to the alternative solutions. Mind you getting at the tach mechanism isn't a fun job either. A job for next winter. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now