Jump to content
IGNORED

Getting Hitched need feedback!


Recommended Posts

The 2003 Venture Not Me. I've been happly married for 34 years my wife told me :)

I want to get hitch and was wondering if anyone had suggestions. New vs used, chrome vs painted, wiring harness length and storage of harness when not pulling trailer.

And Does anyone have one for sale or know of someone?

Link to comment
Share on other sites

There are several different hitches out there, but I will mention the Hitch Doc as a well built one. Yu will need to use a 5 wire system to 4 wire system converter, I personally like the Hoppy as it is a good one and reasonably priced. All of the wires you need for the harness is located behind the license plate inside in that chrome bulbous thing...

Link to comment
Share on other sites

I would check with Carbon One at this link on our classifieds for a hitch set up

http://www.venturerider.org/forum/photopost/showproduct.php?product=30&title=rsv-2f-rstd-reciever-hitch&cat=15

 

I would suggest checking out my classified section(see links below) , I have plug and play 4 wire or 5 wire set ups to match your trailer.

I always just kept my harness ty-wrapped to the hitch insert that takes the place of the center tie bar on the saddle bag stays.

http://www.venturerider.org/forum/photopost/showproduct.php?product=459&title=5-wire-plug-n-play-trailer-harness&cat=18

http://www.venturerider.org/forum/photopost/showproduct.php?product=458&title=4-wire-plug-n-play-trailer-harness&cat=18

Link to comment
Share on other sites

I do not know what is available for 2nd gen hitches, I made my own hitch for my 1st gen.

 

I would not wire the bike until you get your trailer, some trailers are 5 wire and some are 4 wire. You would hate to do all the wiring work and find out it is wrong, OR have to pass up a great deal on a trailer because it has the wire configuration that you did not do.

Most 4 wire trailers are for a flat 4 connector, very few use a round 4.

5 wire is more split between a flat 5 and a round 5 connector. Again it is better to get the trailer and then wire the bike to match.

Link to comment
Share on other sites

A hitch is easy enough to install on the Venture. I wired mine with a 5 wire plug. I felt that was the easiest for Japanese bikes. Then if needed I could use an adaptor for the trailer. In my case I modified my trailer for 5 wire.

 

Mike

Link to comment
Share on other sites

I would check with Carbon One at this link on our classifieds for a hitch set up

http://www.venturerider.org/forum/photopost/showproduct.php?product=30&title=rsv-2f-rstd-reciever-hitch&cat=15

 

I would suggest checking out my classified section(see links below) , I have plug and play 4 wire or 5 wire set ups to match your trailer.

I always just kept my harness ty-wrapped to the hitch insert that takes the place of the center tie bar on the saddle bag stays.

http://www.venturerider.org/forum/photopost/showproduct.php?product=459&title=5-wire-plug-n-play-trailer-harness&cat=18

http://www.venturerider.org/forum/photopost/showproduct.php?product=458&title=4-wire-plug-n-play-trailer-harness&cat=18

 

agree !00%

these two supporting club members offer a superior product that i have installed on several bikes besides my own and they are plug and play easy to install. i recommend them to everyone.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...