A second opinion was not needed on these diaphragms.

[CMCOFFEY]

I decided to tear into my TCI. After getting part of the way in I actually stopped caring about not breaking it. I could not get the connectors in soldered, so I just cracked the board right there.

Here are the pics. The first is the screws that hold the TCI housing shut. 2 snapped and the other 2 lost threads.

 

http://i80.photobucket.com/albums/j169/coffeyR6/Mobile%20Uploads/PHOTO_20161119_155055.jpg

 

http://i80.photobucket.com/albums/j169/coffeyR6/Mobile%20Uploads/PHOTO_20161119_151223.jpg

 

http://i80.photobucket.com/albums/j169/coffeyR6/Mobile%20Uploads/PHOTO_20161119_151853.jpg

 

http://i80.photobucket.com/albums/j169/coffeyR6/Mobile%20Uploads/PHOTO_20161119_154405.jpg

 

I only lost 1 cylinder, so it is not as bad as I expected it to look. The leads from the plug to the board were all very rusty.

[Flyinfool]

Believe it or not, that is one of the cleaner boards that I have seen.

 

That brown goo all over the place is a factory applied coating that is supposed to be there.

[CMCOFFEY]

Believe it or not, that is one of the cleaner boards that I have seen.

 

That brown goo all over the place is a factory applied coating that is supposed to be there.

 

Yeah, it was very poorly applied. I was more concerned with the amount of rust and a few resisters that looked like they had been overworked. The leads going from the board to the pins were bad. I bet most of my problem was there.

 

Not that it matters much now. I will have a new TCI here today as long as DHL will take the signature of someone who is not me.

My bike is still in a million pieces, so hopefully I can fix that this weekend.

[yamagrl]

Yeah, it was very poorly applied. I was more concerned with the amount of rust and a few resisters that looked like they had been overworked. The leads going from the board to the pins were bad. I bet most of my problem was there.

 

Not that it matters much now. I will have a new TCI here today as long as DHL will take the signature of someone who is not me.

My bike is still in a million pieces, so hopefully I can fix that this weekend.

Let me know if you need the program

 

Sent from my XT1060 using Tapatalk

[CMCOFFEY]

Let me know if you need the program

 

Sent from my XT1060 using Tapatalk

 

That would be awesome if you could send me a good program. My email is Christopher.coffey@hotmail.com

 

Was the TCI supposed to come with a disk that contains the custom programming program or can you download the program?

[yamagrl]

That would be awesome if you could send me a good program. My email is Christopher.coffey@hotmail.com

 

Was the TCI supposed to come with a disk that contains the custom programming program or can you download the program?

When I got mine from Dingy he programmed it and also sent software. Sometime in 2014 he sent me an updated ignition program file.

 

Min also came with map sensor.

 

Mine will likely be up for sale soon.

 

Sent from my XT1060 using Tapatalk