luvmy40 Posted September 6, 2016 #26 Posted September 6, 2016 Outside to inside: Screw(needle) spring flat washer o-ring
mountainmanVR Posted September 6, 2016 Author #27 Posted September 6, 2016 Thank you.... now to get new ones... hopefully the Yamaha dealer can get some...
Prairiehammer Posted September 6, 2016 #28 Posted September 6, 2016 I know this may sound strange.. but when I removed the mixture screws, each one was configured differently / missing pieces.. I have been searching for a breakdown diagram.. but so far no luck. As with many other issues I've fixed on this bike.. these are just another roadblock.
snyper316 Posted March 12, 2017 #29 Posted March 12, 2017 (edited) Dumb question is it possible to get these screws for 1983 carbs? Living life one curve after the other. Vroom scooting, thru the countryside. Edited March 12, 2017 by snyper316 Let me correct the question
CaseyJ955 Posted March 12, 2017 #30 Posted March 12, 2017 Im sure it is. If you cant find them hit up Dannymax on the vmax board or pm me and I will call him. Im sure he has a basket of them. Another neat thing about the screws I have experienced is I had a missing washer and O ring on one screw. I had them out for a Shotgun. I scoured the ground and everywhere, turns out the Oring was just sticky enough to stick in the hole with that little washer over it which made it look as if there was nothing left in there. A can of carb spray with that plastic red tube slid in there and sprayed and eventually the Oring and washer came sliding down the tube. Darn funny what a few decades will do to these things!
snyper316 Posted March 12, 2017 #31 Posted March 12, 2017 Yeah I don't even see the oring on the carbs.... 1 and 2... I managed to get washer out of carb 1 Living life one curve after the other. Vroom scooting, thru the countryside.
snyper316 Posted March 13, 2017 #32 Posted March 13, 2017 By the way now that I am on my computer and reading this @luvmy40 did these screws work out for you?
BlueSky Posted March 13, 2017 #33 Posted March 13, 2017 Yeah I don't even see the oring on the carbs.... 1 and 2... I managed to get washer out of carb 1 Living life one curve after the other. Vroom scooting, thru the countryside. They try to hide and are very hard to see sometimes. They may still be in the carb.
snyper316 Posted March 13, 2017 #34 Posted March 13, 2017 They try to hide and are very hard to see sometimes. They may still be in the carb. I am thinking I blew it out or it simply fell out.... when I was messing with it the other one I managed to get the washer and peices of oring
CaseyJ955 Posted March 13, 2017 #35 Posted March 13, 2017 I am thinking I blew it out or it simply fell out.... when I was messing with it the other one I managed to get the washer and peices of oring Sorry it came out in pieces, at least it's accounted for and you know it's not still stuck in the hole.
snyper316 Posted March 13, 2017 #36 Posted March 13, 2017 I have been using a paper clip to get in there and try and get the washer and stuff out... it seems to work ok as long as I dont scrape the walls...
BlueSky Posted March 13, 2017 #37 Posted March 13, 2017 A small set of picks are cheap and work well pulling out the washers and o-rings. I put a tiny bit of sticky gasket sealer on the end of a screwdriver to pull out the screw when I was working on the carbs while they were on the bike.
luvmy40 Posted March 13, 2017 #38 Posted March 13, 2017 By the way now that I am on my computer and reading this luvmy40 did these screws work out for you? Yes, the screw kits I got from Yamaha for a newer model worked perfectly. The ChiCom valve cover gaskets I got on fleabay are another story. The 30 year old gaskets didn't leak as badly.
snyper316 Posted March 13, 2017 #39 Posted March 13, 2017 Yes, the screw kits I got from Yamaha for a newer model worked perfectly. The ChiCom valve cover gaskets I got on fleabay are another story. The 30 year old gaskets didn't leak as badly. Gaskets on the carbs never heard chicom I have used k&l's Living life one curve after the other. Vroom scooting, thru the countryside.
cimmer Posted March 13, 2017 #40 Posted March 13, 2017 Another trick to use to get them out is the straw that comes with a can of WD-40. It should fit into the hole of the oring and washer and you can pull it out that way. Or spray a little WD-40 in there with the straw all the way in can help also. Rick F.
snyper316 Posted March 13, 2017 #41 Posted March 13, 2017 Another trick to use to get them out is the straw that comes with a can of WD-40. It should fit into the hole of the oring and washer and you can pull it out that way. Or spray a little WD-40 in there with the straw all the way in can help also. Rick F. Yeah I know that trick too, But the WD-40 I buy does not come in the aresol cans got tired of 3/4 of the can not being able to be used, for some reason it loses it pressure and won't spray. I have bought 4 cans over the past year and have not got to use all the WD-40 in the can..... So I went and bought refillable squirt bottle and a gallon tin of it... I do have Oreily carb cleaner with the red straw and electronics cleaner with the straw....
yamagrl Posted March 13, 2017 #42 Posted March 13, 2017 Actually a crochet hook works great to extract those stubborn orings. I learned that from Damon's carb video. Also siriusconinc offers some decent carb screws, diaphragms, etc https://www.siriusconinc.com/mobile/search-result.php?make=2&model=xvz12&part=1&partno=&search=search Sent from my XT1060 using Tapatalk
snyper316 Posted March 13, 2017 #43 Posted March 13, 2017 Actually a crochet hook works great to extract those stubborn orings. I learned that from Damon's carb video. Also siriusconinc offers some decent carb screws, diaphragms, etc https://www.siriusconinc.com/mobile/search-result.php?make=2&model=xvz12&part=1&partno=&search=search Sent from my XT1060 using Tapatalk Ha!! Yamagrl never thought about that... My mom crochets!!! Btw where you been hiding. Living life one curve after the other. Vroom scooting, thru the countryside.
yamagrl Posted March 13, 2017 #44 Posted March 13, 2017 Ha!! Yamagrl never thought about that... My mom crochets!!! Btw where you been hiding. Living life one curve after the other. Vroom scooting, thru the countryside. I have a little hiding place in Northwest Florida Sent from my XT1060 using Tapatalk
snyper316 Posted March 13, 2017 #45 Posted March 13, 2017 Hey if you can go off grid there your good lol, I rather get lost in the mtns somewhere.... Living life one curve after the other. Vroom scooting, thru the countryside.
yamagrl Posted March 13, 2017 #46 Posted March 13, 2017 Just hide in plain sight Sent from my XT1060 using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now