Anyone use this Edelbrock front brake line kit?

[gggGary]

http://www.ebay.com/itm/EDELBROCK-R09793S-Yamaha-Front-Brake-Line-Kit-96-06-Xvz13-Royal-Star-Venture-99-/321866608933?hash=item4af0beb125:g:F7oAAOSwLqFV-J8z&vxp=mtr

 

Price is low at $75.00 Really want to improve front brake feel, thinking HH pads, SS (teflon) lines and a 14mm MC

Edited September 2, 2016 by gggGary

[garyS-NJ]

Great price if is stainless. Hard to tell from link

 

Sent from my VS987 using Tapatalk

[gggGary]

part number crosses to this Parts Unlimited / Russell kit.

 

http://www.partzilla.com/parts/detail/aftermarket/XP-4166513.html

 

Partzilla, $85 plus shipping.

 

Same Russell kit on amazon $77

 

https://www.amazon.com/Russell-Brake-Line-Kit-R09793S/dp/B000GV5K4Y

Edited September 2, 2016 by gggGary

[Guest Jamsie]

the lines i bought from hel performance had a tee piece instead of the double outlet banjo. the upper line was a bit short , so that the tee wouldn`t line up central which resulted in left side lide being too short to reach the caliper. i will modify the lines over winter with goodridge parts.

pro tip. when you come to bleed the lines tap on the banjo`s and work your way up the lines to the master. this will dislodge any stubborn bubbles . then to get the last of the air out , tie the brake lever and leave overnight