I need a Manual

[Yammer Dan]

I need a Manual or a You Tube Vid or something that shows how to put a Voyager Kit on a Venture. You know just in case I were ever to get one. I think I can figure out most of it but the How To's would be nice to know before You take off down the road at about 110 mph....

 

I can't find info on the hook-up on these things. Anybody know where I can find them??? Would like to have paper manual but whatever it takes to get install info. 1st and 2nd Gen same?? You must remove Center Stand from 1st Gen? How it hooks on axle. what you measure where. how tight?....little things like that!! Can't find install info. Several sites claim to have but when you look they don't cover enough to make a safe experience of this.

Edited August 11, 2016 by Yammer Dan

[bongobobny]

Ehhhh, just McGuyver it Dan...

[Yammer Dan]

NO!!!

[Guest Jamsie]

A quick search came up with this site @ dan , buy you have to register before downloading the manual . maybe best to use a throwaway email, just in case

http://favbook.xyz

tried the link , DONT DO IT . THEY WANT YOUR CREDIT CARD DETAILS FIRST

Edited August 11, 2016 by Jamsie

[Freebird]

I looked and didn't see anything. Found some videos on YouTube but that's all.

[Guest Jamsie]

found a big list on bing search , BUT everyone was 1 of 2 sites that wanted registration to download , least evil looking was an ebook site

[Guest Jamsie]

Dan, maybe you should talk to @Condor. I was doin some research on your behalf and came across a thread in trike talk that you had replied to on 23/7/16

http://www.venturerider.org/forum/showthread.php?61972-voyager-trike-problems/page3

looks to me that @Condor is your best bet

[Yammer Dan]

It is mostly the hookups to the rear axel I'm concerned about. One forward one backwards?? Pre load is interesting. Belly Pan explains itself I think. Do you remove Center Stand?? Lot of questions.

[gggGary]

What could go wrong?

 

http://airpigz.com/storage/2010-january/Duck-Tape-Cub-1.jpg?__SQUARESPACE_CACHEVERSION=1263666266804

 

http://airpigz.com/storage/2010-january/Duck-Tape-Cub-4.jpg?__SQUARESPACE_CACHEVERSION=1263666380372

[Condor]

 

I can't find info on the hook-up on these things. Anybody know where I can find them??? Would like to have paper manual but whatever it takes to get install info. 1st and 2nd Gen same?? You must remove Center Stand from 1st Gen? How it hooks on axle. what you measure where. how tight?....little things like that!! Can't find install info. Several sites claim to have but when you look they don't cover enough to make a safe experience of this.

 

First off Dan you don't want a manual. The thing is outdated and poorly written. You'd be more confused after reading it. However.... there is a helpfull video on installation, and there are a bunch of videos on their website that are interesting. Give you something to do when bored... :-) http://www.mtcvoyager.com/videos/ Have fun....

 

PS: I was able to leave the side stand on my 2ndGen, but the 1stGen center is going to have to come off...not sure about the side??? I would think it could be left on for when you go back to two wheels... if you ever do??

Edited August 11, 2016 by Condor

[Flyinfool]

Dan

Lots of good info here.

http://www.mtcvoyager.com/used-trike-kits/

[saddlebum]

To's would be nice to know before You take off down the road at about 110 mph....

You should not be going that fast anyway ------ you will lose your tent poles ------- Silly me I forgot you don't bring tent poles.

[Yammer Dan]

Tent poles are useless if ya got handlebars to hang the tent on.....