What did you do to your venture today?

[sleepy2]

Cleaned up bike Saturday and put on a coat of F11 I purchased last fall. Sunday Went for a 250klm ride along Lake Erie road from Port Dover Ont. to Long Point Ont. Then home.

Seen about 40 high end cars on a tour of the windy road I was also on. There were Corvette's new and old - Porches - Lamborghini - Ferrari - and a few I had no idea what they were.

[N3FOL]

Very nice scenery. You have nature and exotic cars. Those high end cars are for sure fun to see on the road. During Pre-Covid times, we went to Pittsburgh and it happened to be a meet and greet thing for car enthusiasts at one of their popular big malls. One section of the parking lot was filled with Lambos and Porches and Ferraris...you name it they were there. It was my only chance to be up close and personal for a machine I’ll never own in my lifetime. LoL

 

Btw, I simply gave my RSV and complete wipe down. Looking forward to ride after today’s rain.

 

 

Sent from my iPhone using Tapatalk

[ecbaatz]

Got a new rubber on the front. 17K miles on the front tire. also put on about 150 - 200 miles taking the long way to the shop LOL.

 

 

You stated that wrong. You took a shortcut to the shop. LOL

[MonsterBiker]

Gave it a bath.  Biketoberfest started in Daytona yesterday, my wife and I will be heading over tomorrow.

[N3FOL]

Rode the SVTC for most of last week and have been riding the RSV for most of this week.  Weather has been great for any ride for the next 7 days.  Maintenance is coming up for my RSV.

[sleepy2]

went for birthday ride of 200klm yesterday. Saw a dozen or so bikes out also.

[Squidley]

Swung a leg over it and rode it to work this morning. 

[N3FOL]

On 10/16/2020 at 4:37 PM, MonsterBiker said:

Gave it a bath.  Biketoberfest started in Daytona yesterday, my wife and I will be heading over tomorrow.

Wish I can experience Biketoberfest at least once in my lifetime.  Have fun.  

[MonsterBiker]

Getting the bike and trailer ready for a trip to the Florida Keys next weekend.

 

[BlueChips84]

Now that the weather is looking pretty consistently cold, I have the RSTD jacked up to start work on torqueing the head bolts. Hopefully this stops my oil leak.

On the plus side, I'm hoping to get my 9yo son involved to get some father son time in!

[Marcarl]

51 minutes ago, BlueChips84 said:

Now that the weather is looking pretty consistently cold, I have the RSTD jacked up to start work on torqueing the head bolts. Hopefully this stops my oil leak.

On the plus side, I'm hoping to get my 9yo son involved to get some father son time in!

I hope you have the nomenclature wrong, and are really meaning the valve cover bolts. If the head bolts are loose enough to cause an oil leak, you gots bigger problems. Now the valve cover bolts are a shoulder bolt, so they only got to: tight, you can't snug them up any more than tight or you will snap them off, so be careful.

[BlueChips84]

35 minutes ago, Marcarl said:

I hope you have the nomenclature wrong, and are really meaning the valve cover bolts. If the head bolts are loose enough to cause an oil leak, you gots bigger problems. Now the valve cover bolts are a shoulder bolt, so they only got to: tight, you can't snug them up any more than tight or you will snap them off, so be careful.

Sadly, I am not talking about the valve cover bolts. This one particular year has a recall for head bolt torque being too low. Unfortunately it expired in 2017, so now it time for brain surgery on her. Worst part will be pulling the cams to get to the bolts and then re timing everything. 

 

So far, no other issues other than some oil weeping from the head gaskets. No oil in coolant or vise versa, although I will drain and replace both over the winter. 

 

Only had the bike a few months, love the power and comfort. Was thinking of selling it after trying out the cruiser thing but each time I posted, I pulled it down as I realized I liked her too much to let go yet! 

 

Oh, and to add: I'm  a machinist and maintenance tech, so well aware of the value of a torque wrench😁👍.

Edited November 16, 2020 by BlueChips84

[Marcarl]

13 minutes ago, BlueChips84 said:

Sadly, I am not talking about the valve cover bolts. This one particular year has a recall for head bolt torque being too low. Unfortunately it expired in 2017, so now it time for brain surgery on her. Worst part will be pulling the cams to get to the bolts and then re timing everything. 

 

So far, no other issues other than some oil weeping from the head gaskets. No oil in coolant or vise versa, although I will drain and replace both over the winter. 

 

Only had the bike a few months, love the power and comfort. Was thinking of selling it after trying out the cruiser thing but each time I posted, I pulled it down as I realized I liked her too much to let go yet! 

 

Oh, and to add: I'm  a machinist and maintenance tech, so well aware of the value of a torque wrench😁👍.

Super,,, save landings!! But if you need help, we've been know to offer suggestions.

[BlueChips84]

5 minutes ago, Marcarl said:

Super,,, save landings!! But if you need help, we've been know to offer suggestions.

Oh, I'll be leaning on you guys if I get in to trouble, that's for sure. I find the quickest way to learn is to get in a bit over your head from time to time. 

[MonsterBiker]

Finally got the headlight and passing lights adjusted properly.  Wow!  What a difference!

[bikerjohn]

put a new blue tooth receiver on the bike it is small but very good. i actually y'd the connection form the cassette deck and have both the blue tooth and my ipod for music choices. also installed a roam dock for my phone.

here is what I purchased: Bluetooth Receiver, Oliomp Wireless Bluetooth 4.1 Car Adapter & Bluetooth Car Aux Adapter, Receiver with Clips Design 3.5mm Stereo Output for Home Audio/Car System, Car Audio Stereo System(Black)

 

[N3FOL]

@bikerjohn What is the power source of your Bluetooth?

[bikerjohn]

plugs into the power receptacle in the fairing 

USB  

[bikerjohn]

drilled my pipes, MY friend has a venture and his were drilled he thought it was stock but when he saw mine he realized it wasn't stock. 

We drilled 4 1/2 holes in the pipes sounds loader but not as load as a Harley 

[circa1968]

Here's my list since buying the bike in Sept:

1. Cassette delete and turn it into a storage cubby.
2. CB delete.
3. Moved the radio antenna from right side to left side & replaced the whip antenna w/ a shorty (https://www.amazon.com/gp/product/B000K50HAI/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
4. Hardwired a bluetooth receiver in behind the fairing, tapping into the 12v port wiring and then the cassette aux jack (https://www.ebay.com/itm/Car-Stereo-Truck-Home-Add-on-3-5mm-Input-Audio-Bluetooth-Receiver-Adaptor-12V/331841419661?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649)
5. Mounted a phone holder/charger on handlebar, also tapped into 12v port (https://www.ebay.com/itm/Universal-Motorcycle-Cell-Phone-Handlebar-Mount-Holder-USB-Charger-with-Switch/192956706728?ssPageName=STRK%3AMEBIDX%3AIT&var=493147868608&_trksid=p2057872.m2749.l2649)
6. Got super, duper lucky and found a NOS Yamaha touring saddle (Corbin) on Ebay from a Canadian Yama dealer.  Total cost was $350 including shipping!!!!
7. Replaced the aftermarket toe shifter, the PO put on, with a stock heel/toe shifter.
8. Replaced aftermarket grips w/ stock, including weights.
9. Removed the chrome radiator grill PO put on.
10. Moved the trunk back.
11. Removed the tank mount for headset cable and for now the cable is tucked up inside the fairing.  Will remove it next time I have the fairing off.

[videoarizona]

Patted the 89 on the tank...then put some air in the tires. Going to start her up now for her warm up. As soon as things slow down (and I'm retired???), I hope to get into the front shocks so I can ride her again!

[Marcarl]

3 hours ago, videoarizona said:

Patted the 89 on the tank...then put some air in the tires. Going to start her up now for her warm up. As soon as things slow down (and I'm retired???), I hope to get into the front shocks so I can ride her again!

You should not have retired!!!!!!!! Weren't you told that by a great number of experienced out-of-workers.

You should have listened more closer.

[K_VANDY]

I looked at it forlornly as I was putting out the recycling. This is going to be a rough winter.......

[N3FOL]

Wiped down the RSV and left her at home. I’ve been riding for about a week now using the SVTC simply because I need heat.  27° commute this am - just layer up properly.  (Will read about changing brake fluid on the SVTC)🤔

[RDawson]

Went out to the shop and gave it a good windshield cleaning, backed it out and rode 100 miles for the second time in less than a week. 62* here today, 68 tomorrow but stuck on the fire truck. After Friday temps drop into December normal range.