Jump to content
IGNORED

top storage box light replacement


Recommended Posts

The lens is glued to the base, mostly on the sides but sometimes a bit on the bottom. Using a utility knife, carefully cut in the slot between the lens and the base. It's quite brittle so don't pry just cut gently as many times as it take to release the lens. My lens is not attached between the signal lens and the rear lens. Use silicon seal to re-attach the lens.

Link to comment
Share on other sites

Make sure it is the light and not the switch on the trunk that is broken. I had it break on my 89. The best way to test it is to bypass the switch and see if the bulbs light that way.

Rick F.

Since there is no turn signal switch on the trunk, this answer would appear to address the trunk's interior light rather than the turn signal light referred to in the OP.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...