Bar backs

[Rafterd]

Anyone ever tried these? I know the straight back interfere with the speedo. But these are curved.

 

https://www.ebay.com/ulk/itm/361105169267

[Rick Haywood]

thought ours where 1 inch

[etcswjoe]

thought ours where 1 inch

 

I believe you are correct.

[videoarizona]

Can't see how those would work?

[M61A1MECH]

Their fitment guide says they will not work. One thing to look at is how they mount to the Triple tree, the hole in the bottom has a UNS 1/2" x 13 TPI thread not a metric thread. I do not have a Venture to look at any more and I just do not recall how the stock bar mounts attach, if it is simply a bolt thru from the bottom, maybe you could substitute a UNS 1/2" x 13 TPI bolt. Make sure it is a high grade steel bolt or stainless steel.

[Rafterd]

Looked everything over, I believe they will work. Ordered them today. Will report yay or nay.

[Rafterd]

Well they may work, but have to remove inner faring to remove old mounts and reroute cables. Just not gonna do that.

 

Bill