Looking for instructions for Carbon One lift adapter

[Mad Dog]

Looks easy enough but the pin isn't lining up correctly, so I thought I'd ask for the instructions. I did read the other posts and I am headed out to check it again. Just figured having the instructions wouldn't hurt!

 

TIA

[Mad Dog]

Just to clarify, I did bend the rod a bit and it works fine... I guess I'm just being anal...

 

Thanks again

[Guest divey]

FWIW, my pin never lines up exactly. I have to reach underneath and give the end of the rod a little persuasion with my finger to line it up. Doug

[Carbon_One]

I've found that due to slight variations the rod is rarely straight when inserting the rod into the frame tabs. It's really not a problem and actually a benefit as it tightens the adapter to the frame.

Proper instructions: turn handle forward (level), then bend the rod enough to get a slip fit for the left side tab (kickstand side), turn handle 180* so its facing rearward. That should tighten the adapter to the frame.

Larry

[Mad Dog]

Perfect... thats what I thought. Works great

 

I've found that due to slight variations the rod is rarely straight when inserting the rod into the frame tabs. It's really not a problem and actually a benefit as it tightens the adapter to the frame.

Proper instructions: turn handle forward (level), then bend the rod enough to get a slip fit for the left side tab (kickstand side), turn handle 180* so its facing rearward. That should tighten the adapter to the frame.

Larry