rjjammer Posted December 24, 2015 #1 Posted December 24, 2015 Everyone, I have a multitude of good usable parts off a 83 Standard. The engine 40,000 miles ran beautifully when removed, all lights, unmolested wiring harness, perfect seat, two windshields, forks, brakes, etc essentially everything but the plastic, frame, and carbs. This bike was given to me by a friend to start my Venture project years ago. Everything will go by spring so I can clean up. No charge, we can arrange how to get it to you. I thought that I would give them to someone resurrecting a Venture, without spending a fortune. Rjjammer
cmiles3 Posted December 28, 2015 #3 Posted December 28, 2015 I have an '83 in the garage that I need to get running. A previous owner hacked the wiring harness, I'd like to get an intact harness to replace it.
Eck Posted December 28, 2015 #4 Posted December 28, 2015 @ rjjammer, your post touches a deep part of my heart, and I want to thank you for such a wonderful offer to help others out. I find your post touching in a way that I can relate too very well. In years past, we had a FREE parts section and I personally saw where several VR family members offered up the spare parts that they had sitting around on a shelf to others here FREE OF CHARGE. At times, even the shipping was free. The FREE parts list / section was a big thing here and it sure helped many members, but a few years later, it sort of fizzled out. Every now and then someone, such as yourself, steps up and offers what they have to others for FREE. I find this a very welcomed offer and hope to see it return through out 2016. I do hope that no one ever takes advantage of asking for a free part, only to sell it later to some one else. Thank you for such an act of kindness!!!!!!!!!!! Pay it forward in 2016.. !!
Jpischke Posted May 1, 2016 #6 Posted May 1, 2016 Hey rjjammer! I've got an 83 royale i'm trying to get running well again, unfortunately though I bent the double headed screw for the shifting linkage really badly, any chance that you would still have one you'd be willing to part with?
OutKast Posted May 1, 2016 #7 Posted May 1, 2016 I am looking for the fairing panels from a standard. I am removing radio/cb/class completely and want the standard covers to put back in.
martindavid4460 Posted July 7, 2016 #8 Posted July 7, 2016 hey would you by any chance have the rear brake master cylinder and proportioning valve? currently running on one front brake.
tntviper1 Posted September 13, 2016 #9 Posted September 13, 2016 morning i am looking for a few things, we can maybe work out a deal. faairing right side vent radio and cover glove box cover helmet lock any emblems PM me if you have available Thank You Todd
Matt_P Posted January 16, 2017 #10 Posted January 16, 2017 hello all, I have a 83 royal mostly intact. If any one needs parts. Im looking for MKll upper and lower forks.
snyper316 Posted January 17, 2017 #11 Posted January 17, 2017 (edited) I could use a new led screen for cms and only parts I have is foot pegs. Mufflers with holes... Um old battery cables Living life one curve after the other. Vroom scooting, thru the countryside. Edited January 17, 2017 by snyper316 Cams? Cms
Matt_P Posted January 17, 2017 #12 Posted January 17, 2017 I could use a new led screen for cams and only parts I have is foot pegs. Mufflers with holes... Um old battery cables Living life one curve after the other. Vroom scooting, thru the countryside. led screen for cams?
snyper316 Posted January 17, 2017 #13 Posted January 17, 2017 I don't think the cms would work on mine I got the standard I think the royal dashes are different. Living life one curve after the other. Vroom scooting, thru the countryside.
rayzar52 Posted May 7, 2018 #14 Posted May 7, 2018 OK here goes I went down a while ago insurance replaced all parts so I have some parts that have some scrapes but can be salved. All FREE : all parts are from a 2007 Royal Star Venture. Upper outer Faring Right side bag and lid L & R lower fairing L & R front motor guards Set stock exhaust pipes Stock tall windshield Short windshield light scratches stock signal light bar passing lamp bar Back pack lid also a set of stock grips. Hope someone else can use these, I need to clean out the garage would hate to just through them out. Please contact me.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now