Jump to content

Recommended Posts

Posted

I have a Yamaha manual for my 89 Venture and find it mostly useless (guess I am too used to Clymer books which give you step by step instructions). Is there a better manual out there for these bikes?

 

Also, looks like I need to either replace or rebuild the starter. Looks like I need to remove the radiator; remove the two bolts on the starter and pull it free - and then figure out how to rebuild it. Are there some obvious tricks I am missing on it?

Posted

The radiator does not have to come out, but the thermostat housing does have to come out. Other than that it is not that bad of a job.

I would not put any money into the starter for a rebuild unless it is already a 4 brush starter. If you have a 2 brush starter, just replace it with a 4 brush.

Posted

you can tell the difference real easy.On the case of a two brush starter you will see two Philips screws on the outside of the case.On the 4 brush starter you see nothing.

Posted

okay, just so I have my facts straight... the 2nd gen bikes were produced between 96-01 and are called the Royal Stars, correct? If I put the money down for a starter want to make sure it is the right one.

Thanks...

Posted

The 96 up royal star or 99 up Ventures have 4 brush starters. Also, the 92 and 93 1st gen ventures had 4 brush starters. Pinwall cycle salvage usually has one on ebay.

Search ebay with the words XVZ1300 starter. If you search using venture, you will also get snowmobile starters

 

http://www.ebay.com/itm/07-Yamaha-Venture-XVZ1300-Royal-Star-1300-STARTER-STARTING-MOTOR-/381425315305?hash=item58ceb86de9:g:ZIsAAOSwsB9WDuY7&vxp=mtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...