fog lights

[10spd]

Has anyone put the Kuryakyn engine mount driving lights on their bike? Do you like? Do you dislike? Did you wire them to an on off switch or to a ignition on circuit?.

 

thanks in advance

[Brake Pad]

when I had my lights, I ran them into the main headlight wiring

[slowrollwv]

When I add lights I run them off a fuse box that I added under the seat. I did use a toggle switch just incase the headlight goes out I am not stuck in the dark. Don't want that to happen again.

[djh3]

Mine run of a key on power wire off my by pass relay.

[cimmer]

I havent used that mount but I run my fog lights off of key switch power source to a toggle switch that powers a relay with the lights wired to the battery with their own fuse. My are PIAA LED fog lights so they have a low power draw. I used a key switch source so that they could be own with out the key in the run position just incase.

Rick F.

[10spd]

Thanks. One more question where can I get the blade type fuse block kit?

[bongobobny]

Contact member Skydoc_17, he has them.

[10spd]

Contact member Skydoc_17, he has them.

doesn't he have the brake delink lines also or am I think of someone else?

[bongobobny]

You are correct, Earl has those as well!

[10spd]

I have a brake fluid leak that I will look for over the winter.

[10spd]

So brake lines could be in my future.