Eck Posted June 28, 2015 #1 Posted June 28, 2015 Applied final coat of Silver and three coats of clear.. removed masking and then reassembled it. Now Im waiting for it to dry before I remount it on the bike. The screwdriver is holding lid from trunk so the seam area can dry properly...
Eck Posted June 29, 2015 Author #4 Posted June 29, 2015 Now you can come up and do mine..... Let me know when you have it all sanded down Dan and I'll come up and do it for you.
Eck Posted June 29, 2015 Author #6 Posted June 29, 2015 did you use a spray can or gun? Just a spray can of silver paint then a spray can of clear from WalMart. I'm sure the trunk will get a few nicks and bumps here and there from debris off the rear tire anyway, so I'm not to interested in a professional paint job on it.
Yammer Dan Posted June 29, 2015 #7 Posted June 29, 2015 Thanks Buddy. Not surehow much painting to be done yet. A good decal of some type a little bigger than a softball would keep me from painting the Faring. Missing one driving light and a antena and mount but its not bad. I took the worse of this one. I hit hard!!Two bike accidents and two cage accidents in the last 10 yrs makes you think a little.
Flyinfool Posted June 29, 2015 #8 Posted June 29, 2015 Dan you can always try to catch up to @cowpuc on sticker count and not have to paint nuttin. I bet that Cowpuc could even tell just where to go to get the perfect sticker for that spot. I know Puc is always telling me where to go......
Wrench Posted June 29, 2015 #9 Posted June 29, 2015 That's a good looking paint job from a rattle can.
Eck Posted June 29, 2015 Author #10 Posted June 29, 2015 Well, here is the finished product.. I gave it another clear coat today and touched up a couple spray can spits & sputters. I just now got it re-installed on my wing where it is drying.
cowpuc Posted June 30, 2015 #11 Posted June 30, 2015 Well, here is the finished product.. I gave it another clear coat today and touched up a couple spray can spits & sputters. I just now got it re-installed on my wing where it is drying. :clap2::dancefool::dancefool: THAT is GORGEOUS ECK!! May sound crazy but I have often wondered why manufactures dont do exactly what you have done my friend.. At least take a good hard look in RnD and how placing the trunk of these touring bikes down at that level to lower the center of gravity.. I REALLY like that Eck!! NICE JOB!!
videoarizona Posted June 30, 2015 #12 Posted June 30, 2015 Eck, is that the same color as the 05 RSV has? Sure looks close. If so...can you let out where you got paint and what color number? I have some painting I want to try on my 05....and she is silver. Thanks, david
Aussie Annie Posted June 30, 2015 #14 Posted June 30, 2015 Thanks Buddy. Not surehow much painting to be done yet. A good decal of some type a little bigger than a softball would keep me from painting the Faring. Missing one driving light and a antena and mount but its not bad. I took the worse of this one. I hit hard!!Two bike accidents and two cage accidents in the last 10 yrs makes you think a little. YEP !! Time for that extra wheel me thinks
Eck Posted June 30, 2015 Author #15 Posted June 30, 2015 Eck, is that the same color as the 05 RSV has? Sure looks close. If so...can you let out where you got paint and what color number? I have some painting I want to try on my 05....and she is silver. David, The spray can of paint I used was "Rustoleum - Satin Nickel ". It has both primer and paint in same can.. Here is a picture of the can and you can get it at Wally World, Lowes, Home depot or most anywhere for about $6 bucks a can. Then I used Rustoleum crystal clear enamel.
KIC Posted July 2, 2015 #16 Posted July 2, 2015 So what trunk is that off of ? Looks great. I am thinking of taking the trunk off of my 87 and building a hitch bolted frame to mount a second trunk on it for a trip. Easier to haul than a trailer. How is yours connected/bolted on to your bike ? Answers Eck answers !! Venturing minds want to know...
Eck Posted July 2, 2015 Author #17 Posted July 2, 2015 (1) So what trunk is that off of ? I have no idea.. It is a scooter trunk. A guy gave it to me. (2) Looks great. Many Thanks!! (3)How is yours connected/bolted on to your bike ? .......I used a piece of aluminum diamond plate and mounted it to my own self made trailer hitch. Then I mounted two (measured and cut to length) drawer slides to the diamond plate. Then I mounted the trunk to the slides. I then made a locking mechanism to hold the trunk in the fwd position when riding, or I can unlock the mechanism and slide the trunk aft to get into it. Hope this helps. If you are interested in how to, send me an email and I will forward you my phone number and walk you thru it if you want.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now