Plasti dip on carb dia.

[thunder1295]

Thought I'd pass this info on, I had a few tiny wholes in the carb dia. and used plastic dip to seal them. Sprayed on 4 light coats, the stuff works great except the dia won't flex like before, little to stiff, the springs don't have enough force to move them back down after opening the throttle. I suggest the most 2 light coats.

Time for some new ones.

Hope this helps some member's out.

 

Thunder.

[Flyinfool]

If using something to seal the pinholes, do not coat the whole diaphragm, use a small brush or something to just seal the holes. This way you do not stiffen the whole thing.

 

Sealing the holes with anything is still only a temporary fix, plan on getting new diaphragms in the not real distant future.

[thunder1295]

Thanks found that out little late, didn't think it would go on that thick, sure do look nice, like new.lol