helmet012001 Posted March 23, 2015 #1 Posted March 23, 2015 Anyone install one of these gs100a flashung brake light modules? Under the license plate there is a bunch of wires that all look the same. Lol. Any tips for getting the correct wires are more than appreciated.
M61A1MECH Posted March 23, 2015 #2 Posted March 23, 2015 It would help a lot if you told us what make and model bike you have. If you have a 96 to 2001 Royal Star, 99 to 2013 Venture or 2005 to 2010 Tour DeLuxe, there should be at least 5 wires in there, the colors and functions are listed below. Left Turn = Brown Brake = Yellow Tail Light = Blue Ground = Black Right turn = Dark Green. I make and sell some back ro back bullet connects that will make the install a breeze and you will not have to cut any wires. PM me and I can get you a price and some up to date photos, below is a link to something simial I make, the back to back jumpers have the wire removed and the bullets are soldered right together. One To Two Bullet Jumpers Photos by royalsteve | Photobucket
helmet012001 Posted March 23, 2015 Author #3 Posted March 23, 2015 Oh yeah sorry. 06 Royal star tour deluxe. Im going to message you after dinner! Thanks alot!
vzuden Posted March 24, 2015 #4 Posted March 24, 2015 Helmet, I've installed a few of those modules including on a RSTD. The module for that one, while a tight fit, did fit inside behind the taillight with all of those wires. Not sure where the model you listed came from but was from Custom Dynamics. The alternative is to put it under the seat. With Steve's connectors it will be easy.
M61A1MECH Posted March 24, 2015 #5 Posted March 24, 2015 Looking at the specs on that flasher unit, it will be a tight fit behind the license plate, you may be better to do as vzuden suggested and locate it under the seat, I do not have an adapter for that exactly but I can make you something. If you want to go this route, the best way to make the adapter would be for you to send me the unit, let me integrate it into an adapter harness for you. Let me know.
helmet012001 Posted March 24, 2015 Author #6 Posted March 24, 2015 The wires are just under the seat too? Seems easy enough. ?
M61A1MECH Posted March 24, 2015 #7 Posted March 24, 2015 Under the seat there is a set of connectors that hook the main harness to the fender harness, it is a small white 6 pin connector set. I make an aux harness that plugs into those connectors to allow adding more lights or a trailer hook up. With a bit of information from you and a little tweeking I can make a plug and play set up for your flasher.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now