ENG2242 Posted March 22, 2015 #1 Posted March 22, 2015 What do I torque the drain plug down to on the oil pan thanks guys I don't have my book
Marcarl Posted March 22, 2015 #2 Posted March 22, 2015 I just normally make mine tight,,,, my guess would be about 30 lbs, but that might not be right.
XV1100SE Posted March 22, 2015 #3 Posted March 22, 2015 Oil filter - 12 ft-lbs Engine drain bolt - 31 ft-lbs page 7-15 in the owners manual which you can download from the 2nd Gen read only section.
Du-Rron Posted March 22, 2015 #4 Posted March 22, 2015 What do I torque the drain plug down to on the oil pan thanks guys I don't have my book I usually use a cheater on the drain plug to strip the threads out real good and then stake the drain bolt in place.
bongobobny Posted March 23, 2015 #5 Posted March 23, 2015 As my Daddy used to say, tight is tight, anything more is stress and strain...
Du-Rron Posted March 23, 2015 #6 Posted March 23, 2015 Since @XV1100SE already gave him the correct answer I just couldn't resist being goofy.
XV1100SE Posted March 23, 2015 #7 Posted March 23, 2015 I thought it was a funny response...and I'm sure there are bikes out there with what you said.
ENG2242 Posted March 23, 2015 Author #8 Posted March 23, 2015 Thanks guys, I think I'll go with the proper torque instead of breaking out the ten foot cheater bar!!!
utadventure Posted March 23, 2015 #9 Posted March 23, 2015 Since @XV1100SE already gave him the correct answer I just couldn't resist being goofy. Still laughing....thanks Du-Rron!
dacheedah Posted March 24, 2015 #10 Posted March 24, 2015 and change the crush washer, cheap insurance
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now