Donvito Posted March 13, 2015 #1 Posted March 13, 2015 The jack for the passenger headset is busted up. I thought I could just use the connection under the seat but there are some wires connecting the headset and RC jacks so I would like to replace both jacks and the wires. I am attaching pictures of what I need so if anyone has one to sell I am interested. There is one for sale on ebay but it seems to have an extra connection that I don't have. Thanks.
cimmer Posted March 14, 2015 #2 Posted March 14, 2015 I think what you are looking for is a 5 connector din plug. Here is a link to one on ebay.. http://www.ebay.com/itm/1-DIN-Jack-Female-Socket-Soldering-5-Pin-Tube-Plug-Radio-Audio-XLR5-Amplifire-/190929857121?pt=LH_DefaultDomain_0&hash=item2c744e6a61 You might also check with a near by Radio Shack and see if they have one in stock as these are fairly common. Hope that helps Rick F.
MiCarl Posted March 14, 2015 #3 Posted March 14, 2015 (edited) RadioShack hadn't had anything like that for years. Try maybe an electronics specialty place. I gotta believe the bone yards are full of the whole assembly. You might contact Pinwall Cycle. In the meantime, the connection between the headset and RC jacks is for the attenuator (volume control). What that knob does is reduce the volume from what the amp puts out. If you plug the headset in directly it will work as if the passenger volume control is set to max. Edited March 14, 2015 by MiCarl
djh3 Posted March 14, 2015 #4 Posted March 14, 2015 I have both sides of the 5 pins I think. If just the 5 pin plug is broke I can probably solder a new one in. I get them off ebay. How about something like this if the controler is junk. IMC passneger mic mute and volume control. Most show for a GW, but as long as its 5 pin they all work.
videoarizona Posted March 14, 2015 #5 Posted March 14, 2015 My Radio Shack has a small section of pull out drawers that has a lot of small parts (surprise to me). And I did see one chassis mount 5 pin connector in one of the small bins. FWIW....I don't remember seeing a drawer system like that at a RS in Phoenix. Maybe it's what the store manager wants to carry???
MiCarl Posted March 14, 2015 #6 Posted March 14, 2015 I used to manage a couple RadioShack stores. The selection in those drawers wasn't what it was in the '70s and '80s. The contents of those drawers was controlled by corporate. By the time I left most of the old time components were gone, replaced by other small items. I'm pretty sure all the DIN stuff was gone. It's possible you saw one in a franchise store (corporate doesn't control their inventory) or something left over that store staff never bothered to clean out.
Marcarl Posted March 14, 2015 #7 Posted March 14, 2015 Try a musical instrument store,,, you might get lucky
Donvito Posted March 14, 2015 Author #8 Posted March 14, 2015 RadioShack hadn't had anything like that for years. Try maybe an electronics specialty place. I gotta believe the bone yards are full of the whole assembly. You might contact Pinwall Cycle. In the meantime, the connection between the headset and RC jacks is for the attenuator (volume control). What that knob does is reduce the volume from what the amp puts out. If you plug the headset in directly it will work as if the passenger volume control is set to max. Thanks for the suggestion. I was able to buy one from Pinwall for less than $30. Hopefully, it works.
Donvito Posted March 14, 2015 Author #9 Posted March 14, 2015 I have both sides of the 5 pins I think. If just the 5 pin plug is broke I can probably solder a new one in. I get them off ebay. How about something like this if the controler is junk. IMC passneger mic mute and volume control. Most show for a GW, but as long as its 5 pin they all work. Dion, thank you for the offer. I ordered a used replacement so hopefully it will solve my problem. If not, I'll contact you about your offer. The controller is good.
djh3 Posted March 14, 2015 #10 Posted March 14, 2015 Don, hang on to the one you got. If we meet up for a meet and eat bring it with you. Maybe I can fix it and you can either keep for spare or sell it and make your money back..
scuff Posted March 15, 2015 #11 Posted March 15, 2015 not to highjack this thread but does anyone know where to get headsets for the factory system I have an 86 venture royale would be great to use the factory system
djh3 Posted March 15, 2015 #12 Posted March 15, 2015 There are several. Air rider.com Air rider, Ed sets. J&M & IMC
Rick Butler Posted March 15, 2015 #13 Posted March 15, 2015 Sorry Vito, I didn't see your post until now. But I have exactly what you need and it's been laying in a drawer for years and you can have it for the cost of postage. Let me know, Rick
Donvito Posted March 15, 2015 Author #14 Posted March 15, 2015 Sorry Vito, I didn't see your post until now. But I have exactly what you need and it's been laying in a drawer for years and you can have it for the cost of postage. Let me know, Rick That's great! I just cancelled my order so I will pm you to work out details. Thank You.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now